Xem 4 sản phẩm
-
Corken – DS/DL (Coro-Flo®)
397 L/min
10.3 bar
-32° to +107°C
400 SSU
Dòng bơm tua-bin Corken từ thế hệ Coro-Flo ban đầu được phát triển để bơm propan, sau đó đã mở rộng để ứng dụng bơm trong nhiều lĩnh vực khác, đặc biệt là có liên quan đến việc truyền chất lỏng dễ bay hơi. Model D (DS/DL) Corken thường được sử dụng để cung cấp bơm và chuyển khí hóa lỏng như NH3 CO2, SO2 và các chất làm lạnh
-
Corken – DÒNG TIÊU CHUẨN
- 1,457 l/min
- 24.1 bar
- 107°C
- 4,250 cSt
Corken’s standard model sliding vane pumps utilize the original ten blade design with no blade drivers. The mechanical seal now has a silicon carbide seal seat providing maximum leakage control and is approved for propane, butane, and agricultural ammonia. Suitable for bulk pump transfer and propane delivery truck applications. Available in 2” and 3” sizes.
-
Corken – DÒNG CÁNH TRƯỢT Z
- 1,457 L/min
- 24.1 bar
- 107°C
- 4,250 cSt
The Z-Series Coro-Vane® pumps offer a six blade design with blade drivers and a patented needle roller thrust bearing rated for 4,000 lbs. The needle roller thrust bearings protects the pump against dynamic impact loads imposed on the pump by the drive system. Premature failures due to axial thrust loads are minimized on truck applications. With O-ring construction throughout, they are rated for 400 psi (28.6 bar) working pressure. Since the Z-models sliding vane pumps are used primarily in LPG (propane & butane) and agricultural ammonia applications, the non-adjustable internal relief valve is pre-set at the factory and does not require adjustments in the field.
Z-Series pumps are a great option for other liquefied gases with high vapor pressures such as natural gas liquids (NGLs), refrigerants, CO2, and many more. Applications include bulk pump transfer, propane delivery truck, and transport. Available in 2”, 3” and 4” sizes.
-
Corken – DÒNG CÁNH TRƯỢT THỦY LỰC
- --
- --
- --
When an electric motor drive is not the preferred option, there are alignment issues, or space is limited, a hydraulic drive is the solution. This option allows the user to mount a hydraulic motor directly to the pump forming a precise compact alignment. The hydraulic drive option is available on Z-Series pumps only. The lettter “H” shown in the model number (e.g. ZH2000) designates the hydraulic drive option.
