Description
Description for Ebara centrifugal pump – EVM, EVMS series
Vertical multistage centrifugal pump available in different materials:
- Stainless steel AISI 304 (EVMS)
- Stainless steel AISI 316L (EVMSL)
- Cast iron (EVMSG)
The innovation and research that are hallmarks of EBARA Pumps Europe can be found in the Shurricane® impeller, a component that distinguishes the EVMS multistage centrifugal pump series.
The patented design of the Shurricane® impeller enables an 80% reduction in axial thrust making it possible to:
- Preserve life of the motor bearing
- Use any commercial motor in all pump models, therefore without the use of motors with reinforced thrust bearings. If maintenance is required, motor replacement will be faster and allow the use of any motor
- Ensure high pump efficiency with MEI rating > 0.7 for the most efficient models
The advantages that come from the EVMS multistage centrifugal pump are also evident in terms of:
- Cartridge mechanical seal, which allows cartridge replacement without having to disassemble the motor mount
- Coupling with spacer that allows easy maintenance without having to remove heavy motors over 5.5 kW
- Smart plug solutions
The EVMS series offers multiple combinations of mechanical seals for every type of requirement and different pipe connections.
- Civil, industrial, agricultural and firefighting pressurisation systems
- Primary water treatment systems
- Reverse osmosis
- Filtration
- Handling of moderately aggressive fluids
- Boiler loading
- Washing systems
- Heating and air conditioning
Technical data for Ebara centrifugal pump – EVM, EVMS series
Flow rate | 1, 3, 5, 10, 15, 20, 32, 45, 64, 90 m³/h |
Total head | 249 m |
Max. working pressure | 1.6, 2.5, 3.0, 3.5 MPa (16, 25, 30, 35 bar) |
Max. temperature of the liquid | -30°C ÷ +140°C |
MEI | > 0.7 |
Poles | 2 |
Insulation class | F (for high temperature class B) |
Protection degree | IP55 (up to 11 kW), IP56 (over 15 kW) |
Voltage | Single-phase 230V±10% |
Materials for Ebara centrifugal pump – EVM, EVMS series
Impeller | AISI 304 (EN 1.4301) |
Shaft | AISI 304 (EN 1.4301) or AISI 329A (EN 1.4462) |
Mechanical seal | Silicon Carbide/Carbon/EPDM or FPM |
Motor support | Cast iron ENGJL-200 EN1561 |
Outer casing | AISI 304 (EN 1.4301) |
Base | AISI 304 (EN 1.4301) and ASTM CF8 (EN 1.4308) for EVMS |
=======================================
TAN LONG TECHNOLOGY SOLUTIONS CO., LTD
Address: 146/18 Nguyen Huu Tho, Phuoc Kien Ward, Nha Be dist., HCMC, Viet Nam
Telephone: (+84)-8 3781 5635/36/37
Email: sales@tanlongvietnam.com | contact@tanlongvietnam.com
Website: www.tanlongvietnam.com
