Showing 145–168 of 313 results
-
Tsurumi – LH-W/LH-W-14
200 mm
110 KW
230 m
6.5 m³/min
The LH-W-series is a three-phase cast iron extra high head drainage pump having dual impellers
-
Tsurumi – KRS
- 200 mm
- 22 KW
- 34.8 m
- 12 m³/min
The KRS-series is a submersible three-phase cast iron high volume heavy-duty drainage pump driven by a 4-pole motor
-
Tsurumi – GSD
- 250 mm
- 150 KW
- 70 m
- 19 m³/min
The GSD-series is a high-powered heavy-duty slurry pump that delivers high head and high volume discharge
-
Tsurumi – KRS (Slurry)
- 200 mm
- 22 KW
- 34.8 m
- 12 m³/min
The KRS-series of slurry-handling type is a submersible three-phase cast iron heavy-duty slurry pump driven by a 4-pole motor
-
Tsurumi – GSZ
- 250 mm
- 150 KW
- 70 m
- 19 m³/min
The GSZ-4-series is a submersible three-phase cast iron high head and high volume heavy-duty drainage pump driven by a 4-pole motor
-
Tsurumi – GPN
- 200 mm
- 37 KW
- 35 m
- 9 m³/min
The GPN-series is a submersible three-phase high power and extra heavy-duty slurry pump driven by a 4-pole or 6-pole motor
-
Tsurumi – SFQ
- 80 mm
- 11 KW
- 44 m
- 2.08 m³/min
The SFQ-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids
-
Tsurumi – LSR
- 60 (gal/min)
- 40 (ft)
Low level high volume residue pump capable of pumping down to 1/4 inches.
Benefit
- Pump holds suction for drainage to 0.4 inch water level.
- Reliable and cost-effective pumps enable Tsurumi to remain an industry leader in the rental and construction markets. Our customers know that while many pumps may look the same, only Tsurumi incorporates the most durable components into the final manufactured product.
Features
- Semi-vortex, urethane rubber impeller with ethylene propylene rubber casing increases wear resistance when pumpage contains abrasive particles.
- Double inside mechanical seals with silicon carbide faces, (both top and bottom) running in an oil filled chamber and further protected by a lip seal running against a replaceable 430 stainless steel shaft sleeve provides for the most durable seal design available.
- Highly efficient, continuous duty, air filled, copper wound motor with class E insulation minimizes the cost of operation.
- Built in thermal & amperage sensing protector prevents motor failure due to overloading or accidental run -dry conditions.
- Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours extend
operational life. - Top discharge, flow-thru design enables operation at low water levels (3/16″) for extended periods.
Applications
- Residential, commercial, industrial wastewater and construction site drainage.
- Effluent transfer.
- Decorative waterfalls and fountains.
- Raw water supply from rivers or lakes.
-
Tsurumi – 2 OM
- 70 (gal/min)
- 45 (ft)
Water Feature Pump Series. Made with top-quality materials and components, Tsurumi pumps have commonly operated in water gardens for over a decade.
Benefit
- All Tsurumi water feature pumps are constructed of the highest quality materials and components for years of continuous use in ponds, waterfalls, fountains, and more. The 2OM features a 304 Stainless Steel housing, oil-free motor, Fiberglass Reinforced Plastic impeller, volute, and top cover. It will pass a 0.4” solid and the semi-vortex design is ideal for string algae and organic matter. The 2OM features a fiberglass reinforced plastic semi-vortex impeller for capability and durability as well as dual inside mechanical seals with Silicone Carbide faces
to provide the longest life. An oil lifter provides lubrication of the seal faces (Patented). - Whether this is your first pond or your tenth, a Tsurumi Water Feature Pump is the right choice to power your stream, waterfall, fountain, or any water feature. Tsurumi offers a wide range of pumps, including 230V and/or 3 phase pumps, 1/5 – 1 HP, and 1.5” – 3” discharges. Select your new or replacement Tsurumi Pump for your skimmer, vault, or pond.
- Reliable and Efficient. There are a lot of choices looking for a pump for your water feature. Don’t be fooled by all of the imposter pond pumps out there. Only a Tsurumi Water Feature pump is as reliable and efficient as a Tsurumi Pump.
TECHNICAL SPECIFICATIONS
2OM, 2PU, 3PN, 4PN, 8PN, 12PN:
- Corrosion resistant pump, durable resin molded parts aid in longer pump life.
- Eco-friendly operation
- Best for fish ponds ad decorative waterfall
- Guide-rail system available
4HF:
- High-flow design with an axial-flow impeller
- Delivers greater water flows
- 304 Stainless steel motor casing, fasterners and shaft
-
Tsurumi – C/C-CR
- 200 mm
- 37 KW
- 70 m
- 27.1 m³/min
The C/C-CR-series (Submersible Cutter Pumps/Cutter Impeller) is a submersible cast iron pump
-
Tsurumi – U/UZ
- 100 mm
- 11 KW
- 25.1 m
- 2.8 m³/min
The UZ-series is a 4-pole-motor-based, middle-sized submersible vortex pump design for handling raw sewage, wastewater and liquid carrying solid matters and fibrous materials
-
Tsurumi – UT
- 50 mm
- 0.75 KW
- 13.5 m
- 0.44 m³/min
The UT-series is an economical type submersible vortex pump designed for handling raw sewage and wastewater from domestic and commercial areas
-
Tsurumi – PU/PN/PSF TM/OM
- 80 mm
- 3.7 KW
- 34 m
- 0.95 m³/min
The PU/PN/PSF TM/OM-series is a submersible vortex pump designed for raw sewage, wastewater, and liquid carrying solid matters
-
Tsurumi – PLS
- 80 mm
- 3.7 KW
- 34 m
- 0.95 m³/min
The PLS-series is a submersible horizontal semi-vortex pump designed for handling wastewater and liquid carrying small solid matters
-
Tsurumi – SQ
- 50 mm
- 0.75 KW
- 15.5 m
- 0.3 m³/min
The SQ-series is a submersible stainless steel portable corrosion-resistant pump designed for handling screened wastewater or clean water
-
Dòng BER
- 150 mm
- 40 kW
- 528 m³/min
The BER-series is a submersible self-aspirating jet aerators combined a submersible pump with a venturi-jet based diffuser
-
Tsurumi – TRN
- 150 mm
- 40 kW
- 528 m³/min
The TRN-series is a submersible self-aspirating aerator designed for aeration and mixing of wastewater
-
Tsurumi – MR
- 4 kW
- 19 m³/min
The MR-series is a submersible mixer designed to generate a powerful jet of water using a propeller that is specially shaped for high efficiency and directly coupled to a submersible motor
-
Tsurumi – MRL
- 4 kW
- 19 m³/min
The MRL-series is a low water level type of submersible mixer designed to operate in water as shallow as 500 mm
-
Tsurumi – FSP
- 50 mm
- 0.75 kW
The FSP-series is a floating scum skimmer designed for the collection of floating scum in the wastewater treatment
-
Tsurumi – FHP
- 80 mm
- 1.5 kW
The FHP-series is a floating decanter designed for discharging supernatant liquid in SBR
-
Tsurumi – MDQ/MDC
- 80 mm
- 1.5 kW
The MDQ/MDC-series is an organic sludge dehydrator in which the feature of multi-disc dehydrator is added on the principle of the screw press dehydrator
-
Tsurumi – JD
- 216 kgDS/h
- 3.15 kW
The JD-series is an organic sludge dehydrator utilizing the concepts of “gravity-filtration” and “compression”
-
Tsurumi – RSR-KS
- 350 mm
- 246.8 m³/min
The RSR-KS-series rotary air blowers are equipped with a 3-lobe spur rotor
