Pump
Viking gear pump (USA)
Viking lobe pump (USA)
Corken vane pump (USA)
Versa Matic diaphragm pump (USA)
Travaini centrifugal pump (Italy)
Travaini vacuum pump (Italy)
Atlas Copco vacuum pump (Belgium)
Flux drum pump (Germany)
Iwaki metering pump (Japan)
Iwaki magnetic pump (Japan)
Ebara centrifugal pump (Japan)
Tsurumi submersible pump (Japan)
Ebara submersible pump (Japan)
Roto progressive cavity pump (India)
Tsurumi blower (Japan)
Travaini blower (Italy)
Air/Gas Compressor
Atlas Copco - Ceccato air compressor (Belgium)
Corken gas compressor (USA)
Loading arm
Flexible hose
Flow meter
ABB flow meter (Switzerland)
Flux flow meter (Germany)
Motor - Gear box
Cemp motor (Italy)
Jie gearmotor (China)
Heat exchanger
Valve
Kitz valve (Japan)
Others
Ball vavle
Check valve
Gate valve
Globe valves
Needle valves
Safety valves
Butterfly valves
Solenoid valves
Pressure reducing valves
Diaphragm valves
Bellow sealed valves
Foot valves
Control valve
Stop valves
Float valves
Sanitary valves
Spare parts
Air compressor
Diaphragm pump
Showing 265–288 of 315 results
-
Flux – For high flammable media
-
50 l/min -
800 mPas
Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available.
-
-
Flux – JUNIORFLUX for smaller quantities
-
21 l/min
-
250 mPas
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle.
-
-
Flux – FES 800
-
60 l/min
-
600 mPas
Pre-assembled pump kit to pump cleaning agens and disinfectants out of 60 l hobbocks. Comprising drum pump F 424, outer tube in polypropylene with commutator motor FEM 4070. Fume gland to protect operator and environment of dangerous vapours. Furthermore, hose and hand nozzle are included.
-
-
Flux – For acids
-
60 l/min
-
600 mPas
Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.
-
-
Motor F 460 Ex – The explosion-proof drum pump motor
-
460/700 W
-
60°C (140°F)
The F 460 Ex is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed. The optimal air flow ensures a very good cooling and thus a service life above average of the carbon brushes.
The motor F 460 Ex EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 460-1 Ex is identical with type F 460 Ex, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped.
-
-
Flux – FBM 4000 Ex
-
600 W
-
--
The FBM 4000 Ex is a compact brushless motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The soft-start and easy to handle speed control, which is integrated in the control knob, allow a sensitive dosing. Speed, current and temperature are monitored electronically. The integrated no-volt release prevents an uncontrolled start of the pump, thus guaranteeing optimal safety.
-
-
Flux – F 416 Ex
-
470 W
-
6 bar
The compressed-air motor F 416 Ex is very light and easy to handle and at the same time extremely powerful. Thanks to a silencer it is very quiet. Alternatively an exhaust hose can be used with which the exhaust air can be guided to an oil separator. The speed is simply adjusted by the operating pressure or the amount of air. The motor is available in three versions: F 416 Ex with tip valve, F 416-1 Ex without valve and F 416-2 Ex with ball valve.
-
-
Flux – F 458
-
460/700 W
-
--
The F 458 is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed, has a special corrosion-resistant painting and is therefore suitable for use in extreme conditions, even in areas with corrosive vapours.
The motor F 458 EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 458-1 is identical with type F 458, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped. -
-
Flux – AdBlue® F 424
-
50 l/min
-
800 mPas
Pre-assembled pump kit to pump Adblue®. Comprising pump F 424 free of non-ferrous metals and sealless in the medium area, commutator motor FEM 4070, hose, hand nozzle and compression gland.
-
-
Flux – COMBIFLUX for AdBlue®
-
33 l/min
-
250 mPas
The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 2 m hose and hand nozzle.
-
-
Flux – COMBIFLUX for smaller quantities
-
21 l/min
-
250 mPas
The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle.
-
-
Flux – For 99,98 % drum emptying
-
35 l/min
-
600 mPas
Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas.
-
-
Flux – Pump kit for acids
-
60 l/min
-
600 mPas
Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.
-
-
Flux – Pump kit for alkalis
-
60 l/min
-
600 mPas
Pre-assembled pump kit to pump alkalis of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising sealless drum pump F 424 with outer tube in polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.
-
-
Flux – Pump kit for concentrated acids
-
40 l/min
-
600 mPas
Pre-assembled pump set for pumping concentrated acids from 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, outer tube in polyvinylidene fluoride and commutator motor F 458, hose, hand nozzle and compression gland.
-
-
Flux – Pump kit for Food and Pharma
-
40 l/min
-
1000 mPas
Pre-assembled pump kit for food and pharma. The pump-kit is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. Comprising drum pump FP 427 FOOD, outer tube stainless steel 1000 or 1200 mm, commutator motor F 458, hose, hand nozzle, hose connection and compression gland.
-
-
Flux – Pump kit for Food and Pharma in Ex-version
-
50 l/min
-
1200 mPas
Pre-assembled pump kit for food and pharma in ex-version. The pump-kit is ideal for frequent medium changes and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Comprising drum pump FP 430 Ex FOOD, outer tube stainless steel, commutator F 460 Ex, hose, hand nozzle, hose connection, compression gland and earth cable.
-
-
Flux – Pump kit for Food and Pharma up to 25.000 mPas
-
50 l/min
-
25000 mPas
Pre-assembled eccentric worm-drive pump kit with planetary gear for food and pharma to pump thin to medium viscous media up to 25.000 mPas out of 200-l drums and IBCs. The pump is especially designed to meet the specific requirements of the food, cosmetic and pharmaceutical industries and works with little turbulences, at constant pressure and ensures a smooth, pulsation-free pumping. Comprising Eccentric worm-drive pump F 560 GS in 1000 or 1200 mm, Commutator motor F 458-1, Stator housing, Stator, Hose, Discharge spout, Hose connection and compression gland.
-
-
Flux – Pump kit for high flammable media
-
50 l/min
-
800 mPas
Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available.
-
-
Flux – Pump kit for industrial applications up to 25.000 mPas
-
50 l/min
-
25000 mPas
Pre-assembled eccentric worm-drive pump kit with planetary gear for industrial applications to pump thin to medium viscous media up to 25.000 mPas out of 200-l drums and IBCs. The positive displacement pump works smoothly at a constant pressure and ensures a gentle, pulsation-free pumping. Comprising Eccentric worm-drive pump F 550 GS in 1000 or 1200 mm, Commutator motor F 457, Stator housing, Stator, Hose, Discharge spout, Hose connection and compression gland.
-
-
Flux – Pump kit for petroleum products
-
80 l/min
-
800 mPas
Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, optionally with commutator motor FEM 4070 (500 Watt) or commutator motor F 457 (800 Watt) available; furthermore are enclosed: hose, hand nozzle and compression gland.
-
-
Flux – Pump kit for universal applications
-
50 l/min
-
800 mPas
Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416.
-
-
Flux – Pump kit JUNIORFLUX for AdBlue®
-
36 l/min
-
250 mPas
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings.
-
-
Flux – Pump kit JUNIORFLUX for smaller quantities
-
21 l/min
-
250 mPas
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle.
-
