Showing all 6 results
-
Siti – BH
291 kW
14000 Nm
226/1
This range is made in cast iron G25 showing a modern design casing and three stages of reduction
-
Siti – NHL
- 210kw
- 12000 Nm
- 466/1
The helical gearbox of series NHL are manufactured, at the moment, in three version:
- NHL: version with solid input shaft
- MNHL: for geared motor B5 (PAM) arranged version;
In the tables concerning the motors availabe, it must be intended that all the motors are availbale in PAM B5 version for each size and ratio, while PAM B14 version is availabe where indicated only
-
Siti – RP2
- 140 kW
- 10000 Nm
- 30/1
All shaft mouting RP2 series are supplied without oil and are provide with breather, unloading and level plugs. Filling in oil is therefore committed to the customer, who will have to introduce the necessary amount of oil. We would like, anyhow, to point out that the quantities given in the tables have a merely indicative value: customer will have in any case to fill in oil up to achieving the level which is visible at sight on the transparent level plug. For the selection of oil, we recommend to strictly adhere to the tables of lubricant.
-
Siti – PD
- 83 kW
- 4015 Nm
- 118/1
It is relates to parallel shaft gearboxes PL-MPL series and to shaft mounted helical PD-MPD series, manufactured by SITI S.p.A.
The PL-MPL and PD-MPD series gearboxes have a G25 cast iron housing and are fitted with two or three stage of reduction gears.
-
Siti – PL
- 83 kW
- 4015 Nm
- 118/1
The PL-MPL and PD-MPD series gearboxes have a G25 cast iron housing and are fitted with two or three stage of reduction gears.
-
Siti – RIGHT ANGLE R
- 8 kW
- 35 Nm
- 3/1
The R series of right-angle helical gearboxes are supplied with synthetic oil sealed-for-life, no maintenance is therefore required. The drive can run in all the mounting positions.
