Hiển thị 73–96 của 313 kết quả
-
Viking – TRA®10
GEAR BOX: Powder-coated standard I 304 stainless steel optional
-
Viking – TRA®20
GEAR BOX: Powder-coated standard I 304 stainless steel optional
-
Viking – STERILOBE
Standard bi-wing rotors offer application flexibility & good solids handling capabilities
Multi-lobe rotors reduce shear & pulsation effect; ideal for sensitive media
Innovative cusps with reliefs allow for easier cleaning and self draining with improved efficiency -
Viking – CLASSIC+
Modular pump design promotes easy disassembly for COP (Clean Out of Place) & CIP (Clean In Place)
-
Viking – RTP
Designed specifically for the hygienic stainless steel road tanker industry, the RTP outperforms the competition by providing higher capacity, higher pressure and unmatched efficiency. The RTP can also reduce loading and unloading time by over 30%.
This increased performance, along with advanced durability, application flexibility, ease of installation and ease of maintenance provide a complete solution for your hygienic tanker needs.
-
Viking – TR-IS
316L stainless steel construction certified for 3A and in compliance with EHEDG standards
-
Viking – TR-C
TR-C and other “C-Series” pumps can be converted to TR-C+ with a simple kit
-
Viking – RTPE
For too long, cast iron pumps have compromised the integrity of chemicals carried in stainless steel road tankers. Designed specifically for the chemical transport industry, the RTPe stainless steel pump delivers that essential missing component. Better yet, it provides a cost-effective solution to this problem, while still outperforming the competition in both speed and reliability.
Based on the industry-leading hygienic RTP, the RTPe incorporates all of the features your chemical tanker needs, while eliminating those that it does not.
Protect your investment and make your chemical transport business even stronger. The RTPe is the essential component to complete your chemical tanker system.
-
Viking – 893
893 Series pumps are designed to provide positive displacement pumping capability in those situations that require the highest assurance of liquid containment. These mag drive pumps provide for the safe, trouble-free transfer of hazardous, EPA-regulated fluids without electronic monitoring as required with mechanical face-type shaft seals. Hard-to-seal liquids are also easily handled with the Viking Mag Drive which eliminates the high cost of mechanical seal replacement and repair. A variety of coupling sizes are available for flow requirements to 75 GPM. The torquecarrying ability of high-strength magnets allows pumps to be coupled with gear reducers for slow-speed handling of viscous liquids. The self-priming positive-displacement
pumping principle provides low-shear, non-pulsing flow. Internal gear pumps are available in stainless steel, steel, and cast iron construction. -
Viking – 895
895 Series pumps are designed to provide positive displacement pumping capability in those situations that require the highest assurance of liquid containment. These mag drive pumps provide for the safe, trouble-free transfer of hazardous, EPA-regulated fluids without electronic monitoring as required with mechanical face-type shaft seals. Hard-to-seal liquids are also easily handled with the Viking Mag Drive which eliminates the high cost of mechanical seal replacement and repair. A variety of coupling sizes are available for flow requirements to 75 GPM. The torquecarrying ability of high-strength magnets allows pumps to be coupled with gear reducers for slow-speed handling of viscous liquids. The self-priming positive-displacement
pumping principle provides low-shear, non-pulsing flow. Internal gear pumps are available in stainless steel, steel, and cast iron construction. -
Viking – 897
897 Series pumps are designed to provide positive displacement pumping capability in those situations that require the highest assurance of liquid containment. These mag drive pumps provide for the safe, trouble-free transfer of hazardous, EPA-regulated fluids without electronic monitoring as required with mechanical face-type shaft seals. Hard-to-seal liquids are also easily handled with the Viking Mag Drive which eliminates the high cost of mechanical seal replacement and repair. A variety of coupling sizes are available for flow requirements to 75 GPM. The torquecarrying ability of high-strength magnets allows pumps to be coupled with gear reducers for slow-speed handling of viscous liquids. The self-priming positive-displacement
pumping principle provides low-shear, non-pulsing flow. Internal gear pumps are available in stainless steel, steel, and cast iron construction. -
Viking – 432
Viking’s Motor Speed Product Line internal gear pumps are extremely well suited for light, medium and intermittent service handling a variety of liquids. The smaller sizes C, F, FH are constructed for heavier duty service. Mechanical seal equipped pump models in sizes C, F, FH, G, H, HL are available with Underwriters label for handling fuel oil. Model numbers for these pumps must be designated by a suffix -X.
UL listed models can be equipped with integral relief valve. Viking’s unique and unusually simple pump construction makes it adaptable to many diversified installations. The pumps possess excellent vacuum characteristics and will operate and prime at suction lifts up to 25 feet, depending upon the vaporization point of volatile liquids. Because of the cushioned action in providing a continuous and steady stream of liquid without splashing, pounding, foaming or churning, the Viking pump is adaptable to an unlimited number of industrial applications
-
Viking – 456
The 456 Motor Mounted units answer the need for more compact, lighter weight equipment. They use the Series 456 hub type pumps with valves in casings and are mounted to modified NEMA “C” flange motors. Units are available with ¼, ⅓, ½ or ¾ HP, 1 ph, 1200 RPM or 1800 RPM, special shaft, TEFC or explosion proof motors. All sizes use the mounting flange bracket with pump connected to motor through a coupling. The pump can be turned on the bracket to any position desired.
-
Viking – 75
For compactness, less weight and simplicity of mounting, Viking’s line of close-coupled pumps are ideal for direct connecting to other pieces of equipment. The positive, smooth delivery of these pumps makes them preferred for many types of applications including filtering, circulating, transferring, lubricating or booster service.
-
Viking – 475
This advanced design is unique in its field for it permits use of STANDARD, unmodified NEMA C flange ball bearing motors.
-
Bơm từ Iwaki SMX
Model: SMX-220, SMX-221, SMX-222, SMX-441, SMX-442, SMX-443, SMX-542, SMX-543, SMX-545
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – SMX-F
Model: SMX-F220, SMX-F221, SMX-F222, SMX-F441, SMX-F442, SMX-F443, SMX-F542, SMX-F543, SMX-F545
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – MX
Model: MX-70, MX-100, MX-250, MX-251, MX-400, MX-401, MX-402, MX-402H, MX-403, MX-403H, MX-505
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – MXM
Model: MXM44, MXM54
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – MD
Model: MD-6K, MD-6ZK, MD-10K, MD-6, MD-6Z, MD-10, MD-15R, MD-20R, MD-20RX, MD-20RZ, MD-30R, MD-30RX, MD-30RZ, MD-40R, MD-40RX, MD-40RZ, MD-40RZ-5, MD-55R, MD-55R-5, MD-70R, MD-70RZ, MD-100R, MD-100R-5
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – MDE
Model: MDE65-200, MDE80-160, MDE125-250
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – MDW
Model: MDW50, MDW80, MDW100
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – AMP
Model: AMP40-1, AMP50-1
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long
-
Iwaki – RD-40
Model: RD-40, RD-40X
Thương hiệu: Iwaki
Xuất xứ: Nhật Bản
Sản phẩm được phân phối chính thức tại Việt Nam bởi Công ty TNHH Giải pháp Kỹ thuật Tân Long