Hiển thị 73–84 của 84 kết quả
-
Viking – CLASSIC+
189 m³/h
12 bar
180 °C
200,000 cST
Modular pump design promotes easy disassembly for COP (Clean Out of Place) & CIP (Clean In Place)
-
Viking – RTP
- 76.8 m³/h
- 12 bar
- 150 °C
- 200,000 cST
Designed specifically for the hygienic stainless steel road tanker industry, the RTP outperforms the competition by providing higher capacity, higher pressure and unmatched efficiency. The RTP can also reduce loading and unloading time by over 30%.
This increased performance, along with advanced durability, application flexibility, ease of installation and ease of maintenance provide a complete solution for your hygienic tanker needs.
-
Viking – TR-IS
- 3,937 LPM
- 10.2 bar
- 150 °C
- 800 cP
316L stainless steel construction certified for 3A and in compliance with EHEDG standards
-
Viking – TR-C
- 3,937 LPM
- 9.4 bar
- 120 °C
- 600 cP
TR-C and other “C-Series” pumps can be converted to TR-C+ with a simple kit
-
Viking – RTPE
- 173 m³/h
- 10 bar
- 110 °C
- 200,000 cST
For too long, cast iron pumps have compromised the integrity of chemicals carried in stainless steel road tankers. Designed specifically for the chemical transport industry, the RTPe stainless steel pump delivers that essential missing component. Better yet, it provides a cost-effective solution to this problem, while still outperforming the competition in both speed and reliability.
Based on the industry-leading hygienic RTP, the RTPe incorporates all of the features your chemical tanker needs, while eliminating those that it does not.
Protect your investment and make your chemical transport business even stronger. The RTPe is the essential component to complete your chemical tanker system.
-
Viking – 893
- 17 m³/h
- 8.5 bar
- 260 °C
- 5,500 cST
893 Series pumps are designed to provide positive displacement pumping capability in those situations that require the highest assurance of liquid containment. These mag drive pumps provide for the safe, trouble-free transfer of hazardous, EPA-regulated fluids without electronic monitoring as required with mechanical face-type shaft seals. Hard-to-seal liquids are also easily handled with the Viking Mag Drive which eliminates the high cost of mechanical seal replacement and repair. A variety of coupling sizes are available for flow requirements to 75 GPM. The torquecarrying ability of high-strength magnets allows pumps to be coupled with gear reducers for slow-speed handling of viscous liquids. The self-priming positive-displacement
pumping principle provides low-shear, non-pulsing flow. Internal gear pumps are available in stainless steel, steel, and cast iron construction. -
Viking – 895
- 17 m³/h
- 8.5 bar
- 230 °C
- 5,500 cST
895 Series pumps are designed to provide positive displacement pumping capability in those situations that require the highest assurance of liquid containment. These mag drive pumps provide for the safe, trouble-free transfer of hazardous, EPA-regulated fluids without electronic monitoring as required with mechanical face-type shaft seals. Hard-to-seal liquids are also easily handled with the Viking Mag Drive which eliminates the high cost of mechanical seal replacement and repair. A variety of coupling sizes are available for flow requirements to 75 GPM. The torquecarrying ability of high-strength magnets allows pumps to be coupled with gear reducers for slow-speed handling of viscous liquids. The self-priming positive-displacement
pumping principle provides low-shear, non-pulsing flow. Internal gear pumps are available in stainless steel, steel, and cast iron construction. -
Viking – 897
- 17 m³/h
- 8.5 bar
- 260 °C
- 5,500 cST
897 Series pumps are designed to provide positive displacement pumping capability in those situations that require the highest assurance of liquid containment. These mag drive pumps provide for the safe, trouble-free transfer of hazardous, EPA-regulated fluids without electronic monitoring as required with mechanical face-type shaft seals. Hard-to-seal liquids are also easily handled with the Viking Mag Drive which eliminates the high cost of mechanical seal replacement and repair. A variety of coupling sizes are available for flow requirements to 75 GPM. The torquecarrying ability of high-strength magnets allows pumps to be coupled with gear reducers for slow-speed handling of viscous liquids. The self-priming positive-displacement
pumping principle provides low-shear, non-pulsing flow. Internal gear pumps are available in stainless steel, steel, and cast iron construction. -
Viking – 432
- 4.5 m³/h
- 17 bar
- 230 °C
- 55,000 cST
Viking’s Motor Speed Product Line internal gear pumps are extremely well suited for light, medium and intermittent service handling a variety of liquids. The smaller sizes C, F, FH are constructed for heavier duty service. Mechanical seal equipped pump models in sizes C, F, FH, G, H, HL are available with Underwriters label for handling fuel oil. Model numbers for these pumps must be designated by a suffix -X.
UL listed models can be equipped with integral relief valve. Viking’s unique and unusually simple pump construction makes it adaptable to many diversified installations. The pumps possess excellent vacuum characteristics and will operate and prime at suction lifts up to 25 feet, depending upon the vaporization point of volatile liquids. Because of the cushioned action in providing a continuous and steady stream of liquid without splashing, pounding, foaming or churning, the Viking pump is adaptable to an unlimited number of industrial applications
-
Viking – 456
- 0.7 m³/h
- 17 bar
- 177 °C
- 1,650 cST
The 456 Motor Mounted units answer the need for more compact, lighter weight equipment. They use the Series 456 hub type pumps with valves in casings and are mounted to modified NEMA “C” flange motors. Units are available with ¼, ⅓, ½ or ¾ HP, 1 ph, 1200 RPM or 1800 RPM, special shaft, TEFC or explosion proof motors. All sizes use the mounting flange bracket with pump connected to motor through a coupling. The pump can be turned on the bracket to any position desired.
-
Viking – 75
- 7 m³/h
- 7 bar
- 177 °C
- 550 cST
For compactness, less weight and simplicity of mounting, Viking’s line of close-coupled pumps are ideal for direct connecting to other pieces of equipment. The positive, smooth delivery of these pumps makes them preferred for many types of applications including filtering, circulating, transferring, lubricating or booster service.
-
Viking – 475
- 7 m³/h
- 7 bar
- 177 °C
- 550 cST
This advanced design is unique in its field for it permits use of STANDARD, unmodified NEMA C flange ball bearing motors.
