Hiển thị 49–72 của 84 kết quả
-
Viking – 4223AX
114 m³/h
14 bar
205 °C
7,700 cST
4223AX & 4323AX Series foot-mounted internal gear pumps are designed and manufactured to comply fully with the current version of American Petroleum Institute’s design standard for positive displacement pumps, API 676. Applications include oil and gas and petrochemical industries where exceptional reliability is required.
-
Viking – 4323AX
- 250 m³/h
- 14 bar
- 205 °C
- 7,700 cST
4223AX & 4323AX Series foot-mounted internal gear pumps are designed and manufactured to comply fully with the current version of American Petroleum Institute’s design standard for positive displacement pumps, API 676. Applications include oil and gas and petrochemical industries where exceptional reliability is required.
-
Viking – 8124A
- 114 m³/h
- 14 bar
- 260 °C
- 55,000 cST
The 8124A Series is the ideal sealing technology within Viking’s Universal Product Line pumps. It is dimensionally interchangeable with other Universal Product Line pumps, allowing an easy upgrade from packed or mechanical seals to sealless technology.
The 8124A Series’ canister is hermetically sealed, providing the highest level of liquid containment available by eliminating traditional dynamic shaft seals traditionally associated with hazardous, hard-to-seal, or expensive liquids. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications (such as caustics, isocyanates, adhesives, solvents and mercaptans) requiring continuous duty at pressures up to 200 PSI (14 Bar)
This Series features 9 different sizes with flows to 500 GPM (114 m3 /h) They may be applied to both thin and thick liquids, and operate in either direction. They are also capable of operating under suction lift conditions. The 8124A series continues the tradition of most robust line of internal gear pumps built by Viking Pump.
-
Viking – 8123A
- 114 m³/h
- 14 bar
- 260 °C
- 55,000 cST
The 8123A Series is the ideal sealing technology within Viking’s Universal Product Line pumps. It is dimensionally interchangeable with other Universal Product Line pumps, allowing an easy upgrade from packed or mechanical seals to sealless technology.
The 8123A Series’ canister is hermetically sealed, providing the highest level of liquid containment available by eliminating traditional dynamic shaft seals traditionally associated with hazardous, hard-to-seal, or expensive liquids. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications (such as caustics, isocyanates, adhesives, solvents and mercaptans) requiring continuous duty at pressures up to 200 PSI (14 Bar)
This Series features 9 different sizes with flows to 500 GPM (114 m3 /h) They may be applied to both thin and thick liquids, and operate in either direction. They are also capable of
operating under suction lift conditions. The 8123A series continues the tradition of most robust line of internal gear pumps built by Viking Pump. -
Viking – 8127A
- 114 m³/h
- 14 bar
- 260 °C
- 55,000 cST
These pumps are designed for long, trouble-free services life under a wide variety of application conditions with minimum maintenance. The points listed below will help provide long service life.
-
Viking – 4223AA
- 364 m³/h
- 14 bar
- 205 °C
- 7,700 cST
4223AA & 4323AA Series pumps offer all of the features, benefits and options of the Universal Product Line pumps with steel externals construction, but feature a larger bracket that enables use of API 682-compliant cartridge seals. This is the most versatile model available with the widest choice of options, yet offers the ability to use most brands and styles of API 682 seals and API seal plans.
-
Viking – 4323AA
- 364 m³/h
- 14 bar
- 205 °C
- 7,700 cST
4223AA & 4323AA Series pumps offer all of the features, benefits and options of the Universal Product Line pumps with steel externals construction, but feature a larger bracket that enables use of API 682-compliant cartridge seals. This is the most versatile model available with the widest choice of options, yet offers the ability to use most brands and styles of API 682 seals and API seal plans.
-
Viking – 495
- 26 m³/h
- 17 bar
- 150 °C
- 3,300 cSt
Viking’s Motor Speed Product Line internal gear pumps represent a technological advance in the science of flow. Through new techniques of feeding the rotor and idler, Viking has achieved what was once considered impossible – high flow rates operating at motor speeds. The largest size (QS) operates at reduced speeds, but still faster than other pumps of similar displacement. Higher speeds mean greater value, with the ability to move more fluid with a smaller pump. It also enables close-coupling to a motor or gear motor, which eliminates shaft misalignment and results in longer seal and bearing life by preventing wear due to misalignment.
-
Viking – 493
- 17 m³/h
- 17 bar
- 177 °C
- 3,300 cSt
Series 493 is designed for vertical or horizontal flange mount installations where space is at a premium. Series 4193 is designed for foot type horizontal mounting. These pumps are built for continuous or intermittent duty for such applications as filtering, circulating, transferring, or booster service in general industrial, petrochemical and other industries.
-
Viking – 4193
- 75 GPM
- 17 bar
- 177 °C
- 3,300 cSt
Viking’s Motor Speed Product Line Series 493 and 4193 steel external pumps are available in capacities up to 75 GPM. These pumps can be furnished directly connected to a 50HZ or 60 HZ motor.
-
Viking – 456-X
- 0.7 m³/h
- 17 bar
- 177°C
- 1,650 cST
The 456 Motor Mounted units answer the need for more compact, lighter weight equipment. They use the Series 456 hub type pumps with valves in casings and are mounted to modified NEMA “C” flange motors. Units are available with ¼, ⅓, ½ or ¾ HP, 1 ph, 1200 RPM or 1800 RPM, special shaft, TEFC or explosion proof motors. All sizes use the mounting flange bracket with pump connected to motor through a coupling. The pump can be turned on the bracket to any position desired.
-
Viking – 432-X
- --
- 17 bar
- 230°C
- 55,000 cST
Viking 34 Series™ Asphalt Pumps are designed to handle asphalts, bitumens, pitch, tar, bunker oils, residual oils and related materials that solidify at ambient temperatures. The 34 Series™ pumps are Viking’s simplest asphalt pumps, with a hydraulically-balanced rotor that eliminates the need for thrust control, but also limits the pressures to 100 PSI and less.
These asphalt pumps melt ambient-temperature solids to a liquid state prior to pump startup using integral jacketing for steam or hot oil. The 34 Series™ are available as packed pumps only
-
Viking – 34
- 102 m³/h
- 7 bar
- 230°C
- 55,000 cST
Viking 34 Series™ Asphalt Pumps are designed to handle asphalts, bitumens, pitch, tar, bunker oils, residual oils and related materials that solidify at ambient temperatures. The 34 Series™ pumps are Viking’s simplest asphalt pumps, with a hydraulically-balanced rotor that eliminates the need for thrust control, but also limits the pressures to 100 PSI and less.
These asphalt pumps melt ambient-temperature solids to a liquid state prior to pump startup using integral jacketing for steam or hot oil. The 34 Series™ are available as packed pumps only
-
Viking – 124E
- 364 m³/h
- 14 bar
- 230°C
- 440,000 cST
The electrically heated pump is specifically designed to heat the asphalt within the pump, prior to start-up. Heat cartridges located on the bracket or casing heat the area behind the rotor and stuffing box. The design also uses heat cartridges installed in the head to quickly melt asphalt throughout the casing.
-
Viking – 4924A
- 13.6 m³/h
- 3.5 bar
- 107°C
- --
Viking’s 4924A Series™ Positive Displacement (PD) pumps offer safety, reliability and high efficiency in refrigeration ammonia recirculation applications. Safety is achieved through use of a double mechanical dynamic shaft seal located between bearings for minimum possible shaft run-out, with a pressurized barrier fluid system, and O-ring type static seals where components are joined. Reliability is provided by slow speed operation and low differential pressures, which maximize bearing and seal life. And efficiency is inherent in the PD Internal Gear pumping principle, compared to centrifugal pumps. Viking pumps can usually use at least one motor size smaller than these technologies.
-
Viking – 4624B
- 41 m³/h
- 10 bar
- 150°C
- 55,000 cST
The 4624B Series™ internal gear pumps utilize hard parts in key wear areas, combined with unique designs and operating practices to reduce abrasive wear for longest life. These pumps are ideally suited for liquids with concentrations of small but hard particles, such as paints, inks and pigments; filled polyols and resins; and waste oils.
-
Viking – 1224A-CHC
- 90 m³/h
- 14 bar
- 107°C
- 200,000 cST
Customers, however, told us they wanted ONE pump to do it all. So we incorporated all of those features, and more, into our 1224A-CHC Series chocolate pumps to enable standardization of pumps and spares throughout the plant.
Whether the task is to transfer cocoa mass from a ball mill across the plant to a blending tank, or to recirculate yogurt coating in a closed loop to feed a series of panners, or to continuously recirculate tempered milk chocolate from an enrobing machine’s sump to the feed trough, or a hundred other possibilities, Viking’s gentle, reliable pumps will improve your operational efficiency
-
Viking – 4197-SEP
- 17 m³/h
- 14 bar
- 105°C
- 1,100 cST
The 4197-SEP Series™ pumps are specially fit with low temperature materials suitable for subzero solvent transfer or circulation applications. They are also assembled and tested using only food grade liquids.
-
Viking – LVP
- 36 m³/h
- 14 bar
- 135°C
- 500 cST
The LVP Series™ is designed for thin, corrosive industrial liquids, flammable liquids which require corrosion protection and applications where pressures or vacuum requirements exceed other pumps’ capabilities. Vanes extend from slots on the rotor, sweeping liquid through a cam-shaped cavity. They offer the benefit of very low slip and high mechanical efficiency.
-
Viking – SG
- 43 m³/h
- 34 bar
- 230°C
- 250,000 cST
Viking SG is an extensive series of precision, industrial-duty external gear pumps that develop higher pressures than other Viking pumps, yet offer a similarly broad range of options to handle a diverse range of liquids and applications
-
Viking – REVOLUTION
- 173 m³/h
- 31 bar
- 150°C
- 440,000 cST
TYPICAL APPLICATIONS: Pharmaceutical I Personal Care I Foods I Beverage I Dairy I Confectionary I Chemical
-
Viking – TRA®10
- 102 m³/h
- 27 bar
- 150°C
- 200,000 cST
GEAR BOX: Powder-coated standard I 304 stainless steel optional
-
Viking – TRA®20
- 102 m³/h
- 34 bar
- 150°C
- 200,000 cST
GEAR BOX: Powder-coated standard I 304 stainless steel optional
-
Viking – STERILOBE
- 171 m³/h
- 15 bar
- 150°C
- 200,000 cST
Standard bi-wing rotors offer application flexibility & good solids handling capabilities
Multi-lobe rotors reduce shear & pulsation effect; ideal for sensitive media
Innovative cusps with reliefs allow for easier cleaning and self draining with improved efficiency
