Showing 1–24 of 39 results
-
Tsurumi – B series
-
800 mm -
110 kW -
70 m -
110 m³/min
Model: 150B475-51/61, TO150B475-51/61, 200B455-52/62, TO200B455-52/62, 250B455-52/62, TO250B455-52/62, 250B475-52/62, TO250B475-52/62, 250B475L-51/61, TO250B475L-51/61, 300B645-52/62, TO300B645-52/62, 300B655-52/62, TO300B655-52/62, 300B475-52/62, TO300B475-52/62, 350B645-53/63, TO350B645-53/63, 400B645-53/63, TO400B645-53/63, 400B655-52/62, TO400B655-52/62, 400B675-52/62, TO400B675-52/62, 500B855-52/62, TO500B855-52/62, 500B675-52/62, TO500B675-52/62
Brand: Tsurumi
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd.
-
-
Tsurumi – LB-A
-
50 mm
-
1.5 kW
-
21 m
-
0.42 m³/min
The LB-A-series is a submersible single-phase automatic portable drainage pump
-
-
Tsurumi – LB
-
50 mm
-
1.5 kW
-
21 m
-
0.42 m³/min
The LB-series is a submersible single-phase portable drainage pump
-
-
Tsurumi – NK
-
80 mm
-
2.2 kW
-
26 m
-
0.8 m³/min
The NK-series is a submersible single-phase portable drainage pump having a larger output motor
-
-
Tsurumi – HB/HSZ
-
80 mm
-
0.75 kW
-
19 m
-
0.3 m³/min
The HSZ-series is a submersible single-phase automatic portable drainage pump
-
-
Tsurumi – HSD
-
80 mm
-
0.75 kW
-
19 m
-
0.3 m³/min
The HSD pump is a submersible single-phase portable slurry pump
-
-
Tsurumi – FAMILY/FAMILY-A
-
25 mm
-
0.1 KW
-
7 m
-
0.08 m³/min
The FAMILY/FAMILY-A series are submersible single-phase portable drainage pumps
-
-
Tsurumi – HSR
-
50 mm
-
0.4 KW
-
12 m
-
0.12 m³/min
The HSR pump is a submersible single-phase portable residue drainage pump
-
-
Tsurumi – LSP
-
25 mm
-
0.48 KW
-
7.8 m
The LSP pump is a single-phase portable self-priming residue drainage pump incorporating a submersible motor
-
-
Tsurumi – LSC
-
25 mm
-
0.48 KW
-
12 m
-
0.08 m³/min
The LSC pump is a submersible single-phase portable residue drainage pump
-
-
Tsurumi – KTV (Slurry)
-
80 mm
-
5.5 KW
-
37 m
-
0.98 m³/min
The KTV-series of slurry-handling type is a submersible three-phase portable slurry pump
-
-
Tsurumi – KTV / KTVE
-
80 mm
-
5.5 KW
-
37 m
-
0.98 m³/min
The KTV-series is a submersible three-phase portable drainage pump
-
-
Tsurumi – KTZ / KTZE
-
150 mm
-
15 KW
-
57 m
-
2.8 m³/min
The KTZ/KTZE-series is a submersible three-phase cast iron high head heavy-duty drainage pump
-
-
Tsurumi – KTD
-
150 mm
-
15 KW
-
57 m
-
2.8 m³/min
The KTD-series is a submersible three-phase cast iron heavy-duty slurry pump
-
-
Tsurumi – LH/LH-14
-
200 mm
-
110 KW
-
230 m
-
6.5 m³/min
The LH-series is a submersible three-phase cast iron high head drainage pump
-
-
Tsurumi – LH-W/LH-W-14
-
200 mm
-
110 KW
-
230 m
-
6.5 m³/min
The LH-W-series is a three-phase cast iron extra high head drainage pump having dual impellers
-
-
Tsurumi – KRS
-
200 mm
-
22 KW
-
34.8 m
-
12 m³/min
The KRS-series is a submersible three-phase cast iron high volume heavy-duty drainage pump driven by a 4-pole motor
-
-
Tsurumi – GSD
-
250 mm
-
150 KW
-
70 m
-
19 m³/min
The GSD-series is a high-powered heavy-duty slurry pump that delivers high head and high volume discharge
-
-
Tsurumi – KRS (Slurry)
-
200 mm
-
22 KW
-
34.8 m
-
12 m³/min
The KRS-series of slurry-handling type is a submersible three-phase cast iron heavy-duty slurry pump driven by a 4-pole motor
-
-
Tsurumi – GSZ
-
250 mm
-
150 KW
-
70 m
-
19 m³/min
The GSZ-4-series is a submersible three-phase cast iron high head and high volume heavy-duty drainage pump driven by a 4-pole motor
-
-
Tsurumi – GPN
-
200 mm
-
37 KW
-
35 m
-
9 m³/min
The GPN-series is a submersible three-phase high power and extra heavy-duty slurry pump driven by a 4-pole or 6-pole motor
-
-
Tsurumi – SFQ
-
80 mm
-
11 KW
-
44 m
-
2.08 m³/min
The SFQ-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids
-
-
Tsurumi – LSR
-
60 (gal/min)
-
40 (ft)
Low level high volume residue pump capable of pumping down to 1/4 inches.
Benefit
- Pump holds suction for drainage to 0.4 inch water level.
- Reliable and cost-effective pumps enable Tsurumi to remain an industry leader in the rental and construction markets. Our customers know that while many pumps may look the same, only Tsurumi incorporates the most durable components into the final manufactured product.
Features
- Semi-vortex, urethane rubber impeller with ethylene propylene rubber casing increases wear resistance when pumpage contains abrasive particles.
- Double inside mechanical seals with silicon carbide faces, (both top and bottom) running in an oil filled chamber and further protected by a lip seal running against a replaceable 430 stainless steel shaft sleeve provides for the most durable seal design available.
- Highly efficient, continuous duty, air filled, copper wound motor with class E insulation minimizes the cost of operation.
- Built in thermal & amperage sensing protector prevents motor failure due to overloading or accidental run -dry conditions.
- Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours extend
operational life. - Top discharge, flow-thru design enables operation at low water levels (3/16″) for extended periods.
Applications
- Residential, commercial, industrial wastewater and construction site drainage.
- Effluent transfer.
- Decorative waterfalls and fountains.
- Raw water supply from rivers or lakes.
-
-
Tsurumi – 2 OM
-
70 (gal/min)
-
45 (ft)
Water Feature Pump Series. Made with top-quality materials and components, Tsurumi pumps have commonly operated in water gardens for over a decade.
Benefit
- All Tsurumi water feature pumps are constructed of the highest quality materials and components for years of continuous use in ponds, waterfalls, fountains, and more. The 2OM features a 304 Stainless Steel housing, oil-free motor, Fiberglass Reinforced Plastic impeller, volute, and top cover. It will pass a 0.4” solid and the semi-vortex design is ideal for string algae and organic matter. The 2OM features a fiberglass reinforced plastic semi-vortex impeller for capability and durability as well as dual inside mechanical seals with Silicone Carbide faces
to provide the longest life. An oil lifter provides lubrication of the seal faces (Patented). - Whether this is your first pond or your tenth, a Tsurumi Water Feature Pump is the right choice to power your stream, waterfall, fountain, or any water feature. Tsurumi offers a wide range of pumps, including 230V and/or 3 phase pumps, 1/5 – 1 HP, and 1.5” – 3” discharges. Select your new or replacement Tsurumi Pump for your skimmer, vault, or pond.
- Reliable and Efficient. There are a lot of choices looking for a pump for your water feature. Don’t be fooled by all of the imposter pond pumps out there. Only a Tsurumi Water Feature pump is as reliable and efficient as a Tsurumi Pump.
TECHNICAL SPECIFICATIONS
2OM, 2PU, 3PN, 4PN, 8PN, 12PN:
- Corrosion resistant pump, durable resin molded parts aid in longer pump life.
- Eco-friendly operation
- Best for fish ponds ad decorative waterfall
- Guide-rail system available
4HF:
- High-flow design with an axial-flow impeller
- Delivers greater water flows
- 304 Stainless steel motor casing, fasterners and shaft
-
