Showing all 2 results
-
Tsurumi – KRS (Slurry)
200 mm
22 KW
34.8 m
12 m³/min
The KRS-series of slurry-handling type is a submersible three-phase cast iron heavy-duty slurry pump driven by a 4-pole motor
-
Tsurumi – LSR
- 60 (gal/min)
- 40 (ft)
Low level high volume residue pump capable of pumping down to 1/4 inches.
Benefit
- Pump holds suction for drainage to 0.4 inch water level.
- Reliable and cost-effective pumps enable Tsurumi to remain an industry leader in the rental and construction markets. Our customers know that while many pumps may look the same, only Tsurumi incorporates the most durable components into the final manufactured product.
Features
- Semi-vortex, urethane rubber impeller with ethylene propylene rubber casing increases wear resistance when pumpage contains abrasive particles.
- Double inside mechanical seals with silicon carbide faces, (both top and bottom) running in an oil filled chamber and further protected by a lip seal running against a replaceable 430 stainless steel shaft sleeve provides for the most durable seal design available.
- Highly efficient, continuous duty, air filled, copper wound motor with class E insulation minimizes the cost of operation.
- Built in thermal & amperage sensing protector prevents motor failure due to overloading or accidental run -dry conditions.
- Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours extend
operational life. - Top discharge, flow-thru design enables operation at low water levels (3/16″) for extended periods.
Applications
- Residential, commercial, industrial wastewater and construction site drainage.
- Effluent transfer.
- Decorative waterfalls and fountains.
- Raw water supply from rivers or lakes.
