Showing all 5 results
-
Travaini – MCU-CH
1200 m³/h
6 bar
The monostage centrifugal pumps are principally for chemical and petrochemical applications and used on almost all the plants. The new design and the wide sizing of the bearing housings allows high reliability and minimum maintenance while the special design of hydraulic profiles for the impeller and the casing allows to reach high efficiencies and low NPSH in any application. The pumps are standardized according to ISO 2858/DIN 24256 standards and the manufacturing program includes three bearing frame sizes of the “Back pull-out” type; the pump casing is of the spiral type with axial suction flange; the impeller is of the radial type with overhang mounting.
-
Travaini – TCH GR.5
- 500 m³/h
- 16 bar
The new pumps series TCH and derived series of the same family, reflect the design guidelines given by ISO 5199 class II standards: these norms provide for the introduction of new and severe manufacturing standards applicable to the pumps manufactured according to ISO 2858/DIN 24256 standards in order to get an ideal product for the heaviest uses, especially in the petrochemical industry, following the example of API standards.
-
Travaini – TCHM
- 500 m³/h
- 10 bar
Built according to ISO standard 2858 and 5199 these sturdy and reliable pumps are available at low price coupled with the easy operation of monobloc units.
The series TCHM and TCTM of Travaini are of the highest quality, with attractive prices to the Chemical and Industry in general.
-
Travaini – TCTM
- 500 m³/h
- 10 bar
Derived from the TCT series and built according to ISO standard 2858 and 5199 these sturdy and reliable pumps are available at low price coupled with the easy operation of monobloc units.
-
Travaini – TCN
- 2000 m³/h
- 6 bar
TCN series pumps are used where in need of an extremely low and stable NPSH all along the performance field. To guarantee this operation, TCN pumps are equipped with a closed impeller with an “advanced inducer” profile.
