Showing all 14 results
-
Flux – Semi-automatic filling systems with flow meters
--
--
Fast and safe dosing of a pre-set quantity by the push of a button
-
Flux – FEM 3070
- 230 W
- --
The internally ventilated three-phase motor FEM 3070 with mains connection has an ergonomic handle for an easy one-handed operation. The quick action coupling is for the easy connection between motor and pump. Due to the mains connection a very long operating time is possible, furthermore, the overcurrent protection switch ensures a high operational safety. Its little weight means minimal effort when changing the drum. Furthermore, it requires little storage space. The motor is also suitable for filling smaller quantities.
-
Flux – FEM 4070
- 500 W
- --
The FEM 4070 has a continuously variable speed for different flow rates and a capacity of 500 watts. The ergonomic handle ensures a safe one-handed operation of the rotary switch to start the pump and the control knob for speed adjustment. It offers an optimal overload protection in all speed ranges and convinces with its compact design, low weight and mainly by its low noise level.
-
Flux – F 457
- 800 W
- --
With 800 Watt the motor F 457 is the most powerful commutator motor. The handy commutator motor in compact design has a very good air cooling and convinces with its low noise level. It is optionally available with an integrated no-volt release that prevents an accidental start and thus guarantees an optimal safety. Additionally, the motor F 457 EL has an easy to handle electronic speed adjustment to regulate the delivery rate.
-
Flux – F 458
- 460/700 W
- --
The F 458 is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed, has a special corrosion-resistant painting and is therefore suitable for use in extreme conditions, even in areas with corrosive vapours.
The motor F 458 EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 458-1 is identical with type F 458, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped. 
-
Flux – F 460 Ex
- 100 W
- --
The explosion-proof drum pump motor
The F 460 Ex is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed. The optimal air flow ensures a very good cooling and thus a service life above average of the carbon brushes.
The motor F 460 Ex EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 460-1 Ex is identical with type F 460 Ex, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped.
-
Flux – FBM-B 3100
- 100 W
- --
The brushless battery motor
The motor FBM-B 3100 can be used immediately and flexibly – without installing cables, independent of power supply – also outdoors. The motor is maintenance-free and has a long battery runtime of up to 120 min. The Li-ion replaceable battery is recharged within 30 min. A 200 l drum can be emptied in only 3 minutes (at 15000 rpm). Ten 200 litre drums can be emptied with one battery charge (at 5000 rpm). It also has an infinitely speed adjustment. Different pumps can be driven by the same motor. -
Flux – FBM 4000 Ex
- 600 W
- --
The world’s first brushless drum pump motor
The FBM 4000 Ex is a compact brushless motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The soft-start and easy to handle speed control, which is integrated in the control knob, allow a sensitive dosing. Speed, current and temperature are monitored electronically. The integrated no-volt release prevents an uncontrolled start of the pump, thus guaranteeing optimal safety. -
Flux – F 403
- 550 W
- --
The three-phase motor for highly viscous media
The three-phase motor F 403 is very low-wear. Furthermore, it convinces with its constant speed and the very low noise level. With the speed of 2850 rpm it is suitable for media with a viscosity up to 30 000 mPas. With the speed of 1450 rpm it is suitable for media with a viscosity up to 80 000 mPas. -
Flux – F 414
- 1.100 W
- --
The three-phase motor for extreme operating conditions
With the robust three-phase gearmotor F 414 an increased duty cycle of the pump is possible, so that it can be used everywhere where extreme conditions prevail. It convinces with a constant speed and is available with motor protection switch or cable terminal box. -
Flux – DSM
- 1.100 W
- --
The “standard” motor for our eccentric worm-drive pumps with flange
The FLUX three-phase motor “DSM” convinces with its constant speed and the low noise level. It is available with a speed of 700 or 930 rpm and a performance of 0.75 or 1.1 kW. The DSM motors are alternatively available with motor protection switch or cable terminal box as well as in Ex-version for use in hazardous areas.
-
Flux – Spur gear drive motor
- 1.100 W
- --
The three-phase motor for the variable throughput
The FLUX spur gear drive motor has a frequency control that allows the variable throughput. The speed range is from 47 to 472 rpm and the performances from 0.055 to 0.55 kW. Furthermore, the motor is infinitely variable and has protection class IP 54.
-
Flux – F 416 Ex
- 470 W
- 6 bar
The lightweight and easy to handle compressed-air motor
The compressed-air motor F 416 Ex is very light and easy to handle and at the same time extremely powerful. Thanks to a silencer it is very quiet. Alternatively an exhaust hose can be used with which the exhaust air can be guided to an oil separator. The speed is simply adjusted by the operating pressure or the amount of air. The motor is available in three versions: F 416 Ex with tip valve, F 416-1 Ex without valve and F 416-2 Ex with ball valve.
-
Flux – FPM
- 2.000 W
- 6 bar
The extremely powerful compressed-air motor
The FPM is an extremely powerful and cool running compressed-air motor. Due to its simple and low maintenance design it is highly reliable.
