Showing 1–24 of 29 results
-
Flux – JUNIORFLUX F 310
47 l/min
250 mPas
The small drum pump JUNIORFLUX F 310 with fixed motor FEM 3070 and mechanical seal is especially suitable for pumping comparatively small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings.
-
Flux – JUNIORFLUX F 314
- 57 l/min
- 250 mPas
The small sealless drum pump JUNIORFLUX F 314 with fixed motor FEM 3070 is especially suitable for pumping comparatively small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings.
-
Flux – F 430 PP-100/50
- 105 l/min
- 105 mPas
Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher lying pipe systems or out of an IBC in the basement to a higher floor.
-
Flux – MINIFLUX
- 240 l/min
- 1000 mPas
The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor.
-
Flux – F 425 / FP 425
- 120 l/min
- 1200 mPas
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.
-
Flux – F 430 TR
- 240 l/min
- 1200 mPas
The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas.
-
Flux – F 427 / FP 427
- 240 l/min
- 1000 mPas
The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards.
-
Flux – F 426
- 240 l/min
- 1200 mPas
The Drum pump F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 can be temporarily operated as pure mixing pump. By turning the adjusting lever, the pump can be easily adjusted to “mixing” or “pumping”. The pump is easy to dismantle for rapid cleaning. The pump is available in stainless steel and polypropylene. The stainless steel version can also be used in hazardous areas.
-
Flux – F 424 / FP 424
- 240 l/min
- 1200 mPas
The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump you can empty drums, IBCs and also basins. Distinct feature, only at FLUX: The specific construction with spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. The F/FP 424 in stainless steel can also be used in hazardous areas.
-
Flux – F 430 / FP 430
- 240 l/min
- 1200 mPas
The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.
-
Flux – For universal applications
- 50 l/min
- 800 mPas
Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416.
-
Flux – JUNIORFLUX for smaller quantities
- 21 l/min
- 250 mPas
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle.
-
Flux – FES 800
- 60 l/min
- 600 mPas
Pre-assembled pump kit to pump cleaning agens and disinfectants out of 60 l hobbocks. Comprising drum pump F 424, outer tube in polypropylene with commutator motor FEM 4070. Fume gland to protect operator and environment of dangerous vapours. Furthermore, hose and hand nozzle are included.
-
Flux – For acids
- 60 l/min
- 600 mPas
Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.
-
Flux – Pump kit JUNIORFLUX for smaller quantities
- 21 l/min
- 250 mPas
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle.
-
Flux – Semi-automatic filling systems with flow meters
--
--
Fast and safe dosing of a pre-set quantity by the push of a button
-
Flux – FEM 3070
- 230 W
- --
The internally ventilated three-phase motor FEM 3070 with mains connection has an ergonomic handle for an easy one-handed operation. The quick action coupling is for the easy connection between motor and pump. Due to the mains connection a very long operating time is possible, furthermore, the overcurrent protection switch ensures a high operational safety. Its little weight means minimal effort when changing the drum. Furthermore, it requires little storage space. The motor is also suitable for filling smaller quantities.
-
Flux – FEM 4070
- 500 W
- --
The FEM 4070 has a continuously variable speed for different flow rates and a capacity of 500 watts. The ergonomic handle ensures a safe one-handed operation of the rotary switch to start the pump and the control knob for speed adjustment. It offers an optimal overload protection in all speed ranges and convinces with its compact design, low weight and mainly by its low noise level.
-
Flux – F 457
- 800 W
- --
With 800 Watt the motor F 457 is the most powerful commutator motor. The handy commutator motor in compact design has a very good air cooling and convinces with its low noise level. It is optionally available with an integrated no-volt release that prevents an accidental start and thus guarantees an optimal safety. Additionally, the motor F 457 EL has an easy to handle electronic speed adjustment to regulate the delivery rate.
-
Flux – F 458
- 460/700 W
- --
The F 458 is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed, has a special corrosion-resistant painting and is therefore suitable for use in extreme conditions, even in areas with corrosive vapours.
The motor F 458 EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 458-1 is identical with type F 458, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped. 
-
Flux – F 460 Ex
- 100 W
- --
The explosion-proof drum pump motor
The F 460 Ex is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed. The optimal air flow ensures a very good cooling and thus a service life above average of the carbon brushes.
The motor F 460 Ex EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 460-1 Ex is identical with type F 460 Ex, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped. -
Flux – FBM-B 3100
- 100 W
- --
The brushless battery motor
The motor FBM-B 3100 can be used immediately and flexibly – without installing cables, independent of power supply – also outdoors. The motor is maintenance-free and has a long battery runtime of up to 120 min. The Li-ion replaceable battery is recharged within 30 min. A 200 l drum can be emptied in only 3 minutes (at 15000 rpm). Ten 200 litre drums can be emptied with one battery charge (at 5000 rpm). It also has an infinitely speed adjustment. Different pumps can be driven by the same motor. -
Flux – FBM 4000 Ex
- 600 W
- --
The world’s first brushless drum pump motor
The FBM 4000 Ex is a compact brushless motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The soft-start and easy to handle speed control, which is integrated in the control knob, allow a sensitive dosing. Speed, current and temperature are monitored electronically. The integrated no-volt release prevents an uncontrolled start of the pump, thus guaranteeing optimal safety. -
Flux – F 403
- 550 W
- --
The three-phase motor for highly viscous media
The three-phase motor F 403 is very low-wear. Furthermore, it convinces with its constant speed and the very low noise level. With the speed of 2850 rpm it is suitable for media with a viscosity up to 30 000 mPas. With the speed of 1450 rpm it is suitable for media with a viscosity up to 80 000 mPas.
