Showing all 15 results
-
Corken – Z4500
1,446 L/min
24.1 bar
107°C
The model Z4500 (4″ Class 300 RF flange) is a stationary pump designed for large loading and unloading applications. When using two or more bulkheads to load transports or multiple bobtails, the Z4500 can shorten the fill times. To protect the pump form excessive pressure buildup, all of the Z-Series stationary pumps are equipped with a built-in internal relief valve. In the event the discharge
-
Corken – Z3500
- 670 L/min
- 24.1 bar
- 107°C
Model: Z3500
Brand: Corken
Origin: USA
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd.
-
Corken – Z4200
- 1,362 L/min
- 6.9 bar
- 107°C
A four inch belly mount pump is mounted to the belly of the tank using a Class 300 RF flange for maximum strength. Both belly-mount flange designs minimize cavitation and increase pumping efficiency.
-
Corken – Z2000
- 287 L/min
- 6.9 bar
- 107°C
A two inch foot-mounted pump with NPT flanges. The pump is securely mounted on a steel frame fixed to the truck’s chassis and piped from the internal valve on the truck’s tank. To limit the length of the power take-off drive line, the Z2000 is typically installed close to the power take-off box between the front of the truck’s tank and the cab of the truck.
-
Corken – Z3200
- 416 L/min
- 6.9 bar
- 107°C
A three inch belly mount pump is mounted to the belly of tank using a Class 300 RF flange offering maximum strength.
-
Corken – F (Coro-Flo)
- 136 L/min
- 27.6 Bar
400 SSU
The Corken Coro-Flo was originally developed to fill propane cylinders, but it has found its way into many other fields, especially where volatile liquid transfer is involved. It is commonly used to feed aerosol filling lines, and to transfer liquefied gases like NH3 CO2, SO2 and the refrigerant gases.
Tech Data
- Pumps 2 to 36 gpm (7.6 to 136 L/min)
- Heads to 700 ft (213 m)
- Max. RPM 3600
- Max. pressure: 400 psig (27.6 Bar)
- Temperature: -25° to +225° F (-32° to +107°C)
- Max. viscosity 400 SSU
- Case/cover: Ductile Iron ASTM A-536
- For thin liquids & liquefied gases: Propane, Butane, Ammonia, Refrigerants, Sulfur Dioxide, Carbon Dioxide, Gasoline Light Oils, Solvents, Propylene, Pentane, Foam Blowing Agents
- Application: ideal for research laboratory work and for handling many liquids of the petrochemical, lpg, nh3 and aerosol industries.
-
Corken 691 – Gas/LPG compressor
- Max 198.8 m3/h
- Max 82.8 bar
- Max 177 °C
Model: 91/F91; 291/F291; 491/F491; 691/F691, D891/FD891
Brand: Corken
Origin: USA
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd.
-
Corken – 491 (LPG, gas compressor)
- 0.2 - 2.0 m³/min
- 1.6 MPa
Model: ZW-0.2/10-16, ZW-0.4/10-16, ZW-0.5/10-16, ZW-0.6/10-16, ZW-0.8/10-16, ZW-1.0/10-16, ZW-1.3/10-16, ZW-1.6/10-16, ZW-2.0/10-16
Brand: Corken
Origin: USA
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd.
-
Corken – 291
- Max 22.9 m3/h
- Max 23.1 bar
Single packed compressors are typically used in non-toxic, non-corrosive applications where oil-free gas and leakage containment are not critical. LPG (propane & butane), agricultural ammonia, and natural gas applications are where a single packed compressor fits well.
LPG Reciprocating Compressors (Non Oil Free): Utilizes one set of V-ring packing per piston rod and No distance piece between the cylinder and crosshead guideNot oil freeSingle stage compressionIdeal for non-toxic, non-corrosive applications where oil-free gas and leakage containment are not critical.
-
Corken – F291
- Max. 101 (22.9) gpm (m3/hr)
- Max 335 (23.1) psig (bar g)
- -25° to +225° F (-32° to +107°C)
LPG Reciprocating Compressors (Non Oil Free): Utilizes one set of V-ring packing per piston rod and No distance piece between the cylinder and crosshead guideNot oil freeSingle stage compressionIdeal for non-toxic, non-corrosive applications where oil-free gas and leakage containment are not critical.
-
Corken – D891
- max 117 cfm (198.8 m3/hr)
- max 1,200 psi (82.8 bar g)
- -350°F (177°C)
Double Packed Reciprocating Compressors (Oil Free): Utilizes two sets of V-ring packing per piston rod and one distance pieceAdjustable packing screw on lower packing maximizes sealing performance over the life of the packing Oil-free gas compression (exceptions: models 791 and 891 are not oil free) Typically used in toxic and corrosive applications where oil-free gas is required and moderate leakage containment is desirable.
-
Corken – B166
- 151 L/min
- 27.6 bar g
Model: B166, B166B, ZV200, B177
Brand: Corken
Origin: USA
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd.
-
Corken – T166
- 295 l/min
- 27.6 bar
The model T166 is a moderate to high pressure build up valve with smooth-acting flow control. It offers bypass protection for pumps with capacities ranging from 30 – 100 gpm (6.8 – 22.7 m3/hr). Unlike the model B177, the model T166 modulates the flow by opening gradually as pressure builds up and bypasses the excess capacity smoothly and silently back to the supply tank. It also has a continuous internal bleed that assists in eliminating vapors.
-
Corken – B177
- 151 L/min
- 27.6 bar
The model B177 is low-pressure build-up bypass valve designed for applications that require protection for positive displacement pumps.
Benefit
- It is ideal for capacities ranging from 100 to 350 gpm (22.7 to 79.5 m3/hr).
- It can also be used as a differential back-pressure valve that assures adequate pressure on meters. To function properly, this valve requires a pressure sensing line from the storage tank.
- Available in 2″ and 2-1/2″ sizes.
Typical Application: Used in liquefied gas bulk-plant installations utilizing loading and unloading pumps.
-
Corken – ZV200
- 250 gpm
- 27.6 bar
A low-pressure build-up bypass valve designed for applications requiring protection for positive displacement pumps. The continuous internal bleed is ideal for systems with air or electric operated internal valves.
