The Corken Coro-Flo was originally developed to fill propane cylinders, but it has found its way into many other fields, especially where volatile liquid transfer is involved. It is commonly used to feed aerosol filling lines, and to transfer liquefied gases like NH3 CO2, SO2 and the refrigerant gases.
- Pumps 2 to 36 gpm (7.6 to 136 L/min)
- Heads to 700 ft (213 m)
- Max. RPM 3600
- Max. pressure: 400 psig (27.6 Bar)
- Temperature: -25° to +225° F (-32° to +107°C)
- Max. viscosity 400 SSU
- Case/cover: Ductile Iron ASTM A-536
- For thin liquids & liquefied gases: Propane, Butane, Ammonia, Refrigerants, Sulfur Dioxide, Carbon Dioxide, Gasoline Light Oils, Solvents, Propylene, Pentane, Foam Blowing Agents
- Application: ideal for research laboratory work and for handling many liquids of the petrochemical, lpg, nh3 and aerosol industries.
View more products: https://tanlongvietnam.com/en/danh-muc-san-pham/pump/vane-pump/corken-usa/
========
𝗛𝗢𝗪 𝗧𝗢 𝗥𝗘𝗣𝗟𝗔𝗖𝗘 𝗦𝗘𝗔𝗟 𝗔𝗦𝗦𝗘𝗠𝗕𝗟𝗬 𝗢𝗡 𝗖𝗢𝗥𝗞𝗘𝗡’𝗦 𝗖𝗢𝗥𝗢-𝗙𝗟𝗢 𝗥𝗘𝗚𝗘𝗡𝗘𝗥𝗔𝗧𝗜𝗩𝗘 𝗧𝗨𝗥𝗕𝗜𝗡𝗘 𝗣𝗨𝗠𝗣𝗦 𝗠𝗢𝗗𝗘𝗟𝗦 𝗖, 𝗗𝗦, 𝗗𝗟, 𝗔𝗡𝗗 𝗙
🔹 Periodic inspection and maintenance of the pump is essential Inspection, maintenance, and installation of the pump must be performed by trained personnel
🔹 Inspection, maintenance, and installation of the pump must comply with the Corken installation, operation & maintenance (IOM) manual, applicable local codes and safety standards
🔹 Transfer of toxic, flammable, or explosive substances using Corken products is at the user’s risk
🔹 Equipment should be operated by qualified personnel only according to applicable codes and safety standards
🔹 Review the installation, operation & maintenance (IOM) manual, important instructions, or applicable service manual pages before performing any maintenance
========
TAN LONG TECHNOLOGY SOLUTIONS CO., LTD
📞 090909 1789
