Description
| MODELS | SPECIFICATIONS | ||||||
|---|---|---|---|---|---|---|---|
| Non-Jacketed* | Performance | Standard Ports | |||||
| Packed Gland | Mechanical Seal | Max Speed | Size | ||||
| RPM | GPM | m³/h | Inches | Type | |||
| GG4195 | GG495 | 1750 | 10 | 2.3 | 1 | NPT | |
| HJ4195 | HJ495 | 1750 | 20 | 4.5 | 1.5 | NPT | |
| HL4195 | HL495 | 1750 | 30 | 6.8 | 1.5 | NPT | |
| AS4195 | AS495 | 1750 | 55 | 12 | 2.5 | NPT | |
| AK4195 | AK495 | 1750 | 85 | 19 | 2.5 | NPT | |
| AL4195 | AL495 | 1750 | 115 | 26 | 2.5 | NPT | |
| KE4195 | 1750 | 150 | 34 | 3 | Flange | ||
| KKE4195 | 1750 | 205 | 47 | 4 | Flange | ||
| LSE4195 | 1150 | 350 | 80 | 4 | Flange | ||
| Q4195 | 750 | 460 | 104 | 6 | Flange | ||
| QS4195 | 640 | 580 | 132 | 6 | Flange | ||
Features & Benefits of Viking Gear Pump 4195
- Direct drive with no gear reducer (with 60 Hz 4 pole motor to 205 GPM / 47 m3/h, 6 pole motor to 350 GPM / 80 m3/h, 8 pole motor to 460 GPM / 104 m3/h)
- Reduces cost of installation
- Eliminates one shaft alignment
- Eliminates one set of couplings and coupling guard
- Reduces footprint
- Eliminates gearbox lubrication and maintenance
- Close-couple to C-face motor or gearmotor at flows to 350GPM / 80 m3/h
- Eliminates all shaft misalignment and coupling guards
- Keeps shafts aligned for longer seal and bearing life
- Simplifies mounting on skid frame without extra baseplate
- Enables vertical mounting for smallest footprint (up to 350 GPM / 80 m3/h)
- Heavy duty design with sealed-for-life bearings
- No relubrication required
- Thrust control enables pressures to 250 PSI / 17 BAR (G-AL sizes) or 150 PSI / 10 BAR (KE-QS sizes)
- Enables end clearance adjustment for viscosity or to compensate for wear over time
- Gauge ports standard on all sizes.
- Allows easy application of gauges or transducers
- Behind-the-rotor mechanical seals with FKM elastomers and Carbon/SiC faces as standard
- Eliminates bracket bushing, enables use of antifriction bearing external to liquid
- Heavy duty seal provides broad application, long life
- Casing weep hole between seal and forward bearing enables detection of seal leakage, prevents intrusion into sealed bearing
- KE-QS sizes are available with ANSI or DIN flanges. No piping adaptors required to conform to local standards
- Opposite porting enables easy in-line mounting to almost any piping system
- Pressure lubricated idler pin lubricates the idler pin/bushing interface to extend life on thin liquids (AS-QS Sizes)
- Static O-ring seals ensure maximum sealing capability on thin liquids (flat gaskets furnished on relief valve only on G-HL sizes)
- Hardened steel idler on KE-QS sizes provides maximum service life and helps protect against cavitational wear on low NPSHa applications
Application of Viking Gear Pump 4195
- Refined Fuels
- Mobile Pump Carts
- Lube Oils
- Glycols
- Rotating Equipment Lubrication
===========
CAPACITY: 0 to 115 GPM (0 to 26 m³/h)
PRESSURE: to 250 PSI (17 BAR)
TEMPERATURE: -40 to +300 °F (-40 to +150 °C)
VISCOSITY: 28 to 15,000 SSU (1 to 3,300 cST)
===========
SERIES 495, 4195
MOTOR SPEED PRODUCT LINE l CAST IRON PUMPS
About O-PRO™
Viking Pump® is the leader in internal gear innovation and the latest development is the O-Pro™ seal technology. This new series benefits from the enhancement of our own factory engineered and installed seal. This technology features a robust seal and lubrication chamber, all in one.
Viking can save you time and money by helping you make the best pump decisions.
✦ ✦ ✦ ✦ ✦ ✦ ✦ ✦
TAN LONG TECHNOLOGY SOLUTIONS CO., LTD
🤙 090909 1789
🏬 146/18 Nguyen Huu Tho St., Phuoc Kien Ward, Nha Be Dist. HCMC, Viet Nam
