Viking – 456-X

The 456 Motor Mounted units answer the need for more compact, lighter weight equipment. They use the Series 456 hub type pumps with valves in casings and are mounted to modified NEMA “C” flange motors. Units are available with ¼, ⅓, ½ or ¾ HP, 1 ph, 1200 RPM or 1800 RPM, special shaft, TEFC or explosion proof motors. All sizes use the mounting flange bracket with pump connected to motor through a coupling. The pump can be turned on the bracket to any position desired.

Danh mục: Máy bơm công nghiệp, Bơm bánh răng Viking (Mỹ), Dòng sản phẩm cho môi chất đặc biệt Từ khóa: Viking - USA, Bơm bánh răng Viking - Mỹ, Gear Viking Pump - USA, Liquid Specific Product Line, Dòng sản phẩm cho môi chất đặc biệt, Viking 456-X series

Không có tài liệu

Gửi báo giá

Mô tả

Mô tả

FEATURES & BENEFITS

Relief Valve Standard
Permits bypassing of liquid from discharge back to suction side of pump. Prevents building up excessive pressure in discharge line. If reversing pump at any time, valve parts must be inserted in opposite port. Pumps with relief valve are built with right hand suction as standard.
Mechanical Seal
All models are furnished with mechanical seal. The seal is a rotary type packaged unit that is simple and self-adjusting

===========

CAPACITY: 0 to 3 GPM (0 to 0.7 m³/h)

PRESSURE: to 250 PSI (to 17 Bar)

TEMPERATURE: -60 to +350 °F (-51 to +177 °C)

VISCOSITY: 28 to 7,500 SSU (1 to 1,650 cST)

✦ ✦ ✦ ✦ ✦ ✦ ✦ ✦