Viking – 4226A

Viking – 4226A

Pumps are designed for a broad range of applications, from thin to thick, requiring continuous duty at pressures up to 200 PSI (14 Bar). Even higher pressures are possible with high fluid viscosities at reduced operating speeds (consult factory). They are also capable of operating under suction lift conditions and operate equally well in either direction.
The Universal Product Line has the broadest range of sealing options of all pumps built by Viking. The stuffing box on all sizes accepts packing, numerous component single mechanical seals, or a wide variety of cartridge seals.
The Universal Product Line is Viking Pump’s most versatile line of internal gear pumps due to the availability of many design and material options.

Mã: S306 Danh mục: , , Từ khóa: , , , , ,
Tải tài liệu
Gửi báo giá

Mô tả

FEATURES & BENEFITS

  • Positive Displacement Internal Gear pumping principle handles a broad range of viscosities with constant flow rate
  • Axial rotor thrust is controlled by double row ball bearing or tapered roller bearings; a bushing provides a secondary point of radial shaft support
  • Rotatable bearing housing provides easy rotor end clearance adjustment for viscosity or to compensate wear
  • Numerous material options are available for bushings, idler pins, shafts, rotors, idlers and elastomers
  • Gear and pump geometry has been optimized based on more than 100 years of experience
  • Footed ductile iron bracket provides rigid mounting to help maintain alignment, which extends seal and bearing life
  • Can use direct drive, gear reducer or gearmotor drive, or belt-drive
  • Pressure relief valve standard; less valve / plain head option available
  • Series designed with an enlarged bearing housing.
    Used in conjunction with a spacer coupling permits easy cartridge seal installation and removal in place without
    removing the head and rotor/shaft.
  • Seal options include packing, single component seals, cartridge lip seals and cartridge single and double mechanical seals. Various seal flush plans are available.

===========
CAPACITY: 0 to 500 GPM (0 to 114 m3/h)

PRESSURE: to 200 PSI (to 14 Bar)

TEMPERATURE: -60 to +650 °F (-51 to +343 °C)

VISCOSITY: 28 to 2,000,000 SSU (1 to 440,000 cST)

===========
UNIVERSAL PRODUCT LINE:
DUCTILE IRON – JACKETED PUMPS

✦ ✦ ✦ ✦ ✦ ✦ ✦ ✦

THÔNG TIN LIÊN HỆ

Công ty TNHH Giải Pháp Kỹ Thuật Tân Long – nhà phân phối chính thức thương hiệu Bơm bánh răng, Bơm cánh khể VIKING (Mỹ) tại Việt Nam

🤙 090909 1789

📩 sales@tanlongvietnam.com

🌐 www.tanlongvietnam.com

🏬 146/18 Nguyễn Hữu Thọ, Phước Kiển, Nhà Bè, TP. Hồ Chí Minh, Việt Nam

Sản phẩm tương tự

Số điện thoại
0909091789