Thông số kỹ thuật
- Công suất tối đa: 100 m3/h
- Áp suất tối đa: 10 bar
Máy bơm ly tâm đơn tầng cánh với cánh quạt kín theo tiêu chuẩn ISO 2858 và 5199.
Lợi ích nổi trội bơm ly tâm TCA Traivai
Thông số kỹ thuật
Máy bơm ly tâm một tầng cánh, có cánh quạt kín theo tiêu chuẩn ISO 2858 và 5199.
The monostage centrifugal pumps are principally for chemical and petrochemical applications and used on almost all the plants. The new design and the wide sizing of the bearing housings allows high reliability and minimum maintenance while the special design of hydraulic profiles for the impeller and the casing allows to reach high efficiencies and low NPSH in any application. The pumps are standardized according to ISO 2858/DIN 24256 standards and the manufacturing program includes three bearing frame sizes of the “Back pull-out” type; the pump casing is of the spiral type with axial suction flange; the impeller is of the radial type with overhang mounting.
The new pumps series TCH and derived series of the same family, reflect the design guidelines given by ISO 5199 class II standards: these norms provide for the introduction of new and severe manufacturing standards applicable to the pumps manufactured according to ISO 2858/DIN 24256 standards in order to get an ideal product for the heaviest uses, especially in the petrochemical industry, following the example of API standards.
Dòng bơm ly tâm TCT Travaini (Ý) có khả năng xử lý mà không bị tắc nghẽn khi bơm các chất lỏng lẫn với chất rắn hoặc sợi lơ lửng, cũng như khi bơm chất lỏng như bùn nhão và nhớt. Bơm có bánh công tác dạng xoắn bên trong.
Built according to ISO standard 2858 and 5199 these sturdy and reliable pumps are available at low price coupled with the easy operation of monobloc units.
The series TCHM and TCTM of Travaini are of the highest quality, with attractive prices to the Chemical and Industry in general.
Derived from the TCT series and built according to ISO standard 2858 and 5199 these sturdy and reliable pumps are available at low price coupled with the easy operation of monobloc units.
TCD pump series (see cross section below) are specifically designed to handle thermal fluids up to 320˚C without special cooling systems. The heat from the pumped product is greatly blocked by special “heat barrier” chamber located between the pump casing and the impeller. The bearing frame has been especially designed with cooling fins to effectively dissipate the heat coming from the pump casing so that standard, simple and single mechanical seal can be safely used. The rotor is supported with oversized ball bearings of the C3 series that are lubricated with oil of medium viscosity. Pump casings and impellers are the same as for pump series TCH smaller two frames. Materials of construction are Ductile iron or Stainless steel AISI 316. For the latter construction it is possible to have a special seal arrangement “SP” (see page at side). Pump dimensions and characteristics are in accordance to ISO 2858/DIN 24256 standards and are the same as for the correspondent models from the TCH series. Capacity up to 350 m3 /h and head to 10 bar.
Magnetic drive monostage centrifugal pumps with closed impeller and dimensions according to ISO 2858 standards.
TCS series pumps are mainly designed for pumping liquids containing small solids, filaments, sludges and viscous liquids, avoiding blockages. The impeller is and open-like type. The dimensions are standardized according to ISO 2858 / DIN 24256 standards.
TCN series pumps are used where in need of an extremely low and stable NPSH all along the performance field. To guarantee this operation, TCN pumps are equipped with a closed impeller with an “advanced inducer” profile.
Trụ sở chính
146/18 Nguyễn Hữu Thọ, Phước Kiến, Nhà Bè, Hồ Chí Minh
Văn phòng đại diện
Tầng 11, Tòa nhà Zen Tower
12 Khuất Duy Tiến, Thanh Xuân Trung, Thanh Xuân, Hà Nội
79 Ngô Quang Thắm, Long Thới, Nhà Bè, Hồ Chí Mính