Flux – F 425 / FP 425

Flux – F 425 / FP 425

With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.

Mã: 78233320146b-1-1-1-1-2 Danh mục: , , , Từ khóa: , , , , ,
Không có tài liệu
Gửi báo giá

Mô tả

Technical data:

  • Flow rate: max. 120 l/min1
  • Delivery head: max. 26 mwc2
  • Viscosity: min. 1 mPas – max. 1200 mPas2
  • Outer tube diameter: min. 41 mm3 – max. 50 mm3
  • Immersion length: 700, 1000, 1200
  • Materials outer tube: Polypropylene, Stainless steel, hastelloy C
  • Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
  • Seal: with mechanical seal
  • Container: 200 l drums, 1000 l IBC

1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.

2 dependent on pump model, motor and medium

3 dependent on pump model

Product attributes

  • With backflow stop
  • Two adjusting levers to easily close the backflow stop
  • With mechanical seal for seal of inner tube
  • Metal core in the inner tube at the PP version
  • Versions for use in hazardous areas available
  • Grease-lubricated shaft bearing
  • Can be combined with various motors as required

Benefits

  • Optimal residual emptying with e.g. less than 0.05 l residual amount left in 200 l drum
  • No tilting to totally empty the drum
  • Reduction of cleaning and waste disposal costs
  • No loss of medium when taking the pump from drum to drum
  • Optimal use of fluids
  • Unique, only at FLUX: the inner tube reinforced by a metal core at the PP version. It prevents leakage and unnecessary wear of the mechanical seal in all operating temperature ranges.
  • Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached
  • Stainless steel and hastelloy C version can be used in hazardous areas

=======================================

CÔNG TY TNHH GIẢI PHÁP KỸ THUẬT TÂN LONG
Địa chỉ: 146/18 Nguyen Huu Tho, Phưoc Kien, Nha Be, HCMc, VN
Điện thoại: (+84)-8 3781 5635/36/37
Email: sales@tanlongvietnam.com | contact@tanlongvietnam.com
Website: www.tanlongvietnam.com

Sản phẩm tương tự

Số điện thoại
0909091789