Showing all 10 results
-
Bơm thùng phuy Flux F424
Thông tin chung:
Tên gọi: Bơm thùng phuy F424/ FP424
Model: F424/ FP424.
Thương hiệu: Flux.
Xuất xứ: Đức.
Ứng dụng:
Ngành hóa chất/ hóa chất công nghiệp: Bơm axit, bazo, dung dịch muối từ thùng, IBC, bồn chứa.
Trong ngành hóa/ xử lý bề mặt, mạ điện, xử lý hóa chất ăn mòn nhẹ.
Ngành dầu & nhiên liệu, hóa chất dễ cháy, dung môi.
Công ty TNHH Giải Pháp Kỹ Thuật Tân Long – nhà phân phối chính thức thương hiệu Flux tại Việt Nam.
-
Bơm phuy bình chứa MINIFLUX
-
240 l/min -
1000 mPas
Bơm container compact lắp đặt ngang MINIFLUX được thiết kế để xả hết IBC thông qua cổng xả ở mức sàn. Được thiết kế như một giải pháp thay thế cho bơm đứng, MINIFLUX có thể được sử dụng khi IBC không thể tiếp cận từ phía trên. Nó phù hợp cho các ứng dụng khi việc xả bằng trọng lực qua cổng xả không đủ, ví dụ như xả nhanh hoặc chuyển sang container khác ở vị trí cao hơn. Nguồn điện có thể được cung cấp lý tưởng bằng động cơ chổi than hoặc động cơ khí nén.
Thông tin chung của sản phẩm:
Tên gọi: Bơm phuy bình chứa MINIFLUX
Thương hiệu: Flux.
Xuất xứ: Đức.
Ứng dụng:
Ứng dụng theo ngành:
Ngành hóa chất/ dung môi: chuyển, chiết rót hóa chất, dung môi dễ bay hơi.
Ngành dầu & nhiên liệu: dầu mỏ, nhiên liệu.
Ngành mỹ phẩm/ hóa mỹ phẩm: dung dịch mỹ phẩm, chất lỏng nguyên liệu mỹ phẩm…
Ngành thực phẩm/ chế biến thực phẩm.
Ngành xử lý dung dịch / nước và điện phân.
Công ty TNHH Giải Pháp Kỹ Thuật Tân Long – nhà phân phối chính thức thương hiệu Flux tại Việt Nam.
-
-
Flux – F 425 / FP 425
-
120 l/min
-
1200 mPas
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.
-
-
Flux – F 430 TR
-
240 l/min
-
1200 mPas
The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas.
-
-
Flux – F 426
-
240 l/min
-
1200 mPas
The Drum pump F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 can be temporarily operated as pure mixing pump. By turning the adjusting lever, the pump can be easily adjusted to “mixing” or “pumping”. The pump is easy to dismantle for rapid cleaning. The pump is available in stainless steel and polypropylene. The stainless steel version can also be used in hazardous areas.
-
-
Flux – F 424/FP 424
-
240 l/min
-
1200 mPas
The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump you can empty drums, IBCs and also basins. Distinct feature, only at FLUX: The specific construction with spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. The F/FP 424 in stainless steel can also be used in hazardous areas.
-
-
Flux – F 430/FP 430
-
240 l/min
-
1200 mPas
The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.
-
-
Flux – F 460 Ex
-
460/700 W -
60°C (140°F)
The F 460 Ex is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed. The optimal air flow ensures a very good cooling and thus a service life above average of the carbon brushes.
The motor F 460 Ex EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 460-1 Ex is identical with type F 460 Ex, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped.
-
-
Flux – FBM 4000 Ex
-
600 W
-
--
The FBM 4000 Ex is a compact brushless motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The soft-start and easy to handle speed control, which is integrated in the control knob, allow a sensitive dosing. Speed, current and temperature are monitored electronically. The integrated no-volt release prevents an uncontrolled start of the pump, thus guaranteeing optimal safety.
-
-
Flux – F 416 Ex
-
470 W
-
6 bar
The compressed-air motor F 416 Ex is very light and easy to handle and at the same time extremely powerful. Thanks to a silencer it is very quiet. Alternatively an exhaust hose can be used with which the exhaust air can be guided to an oil separator. The speed is simply adjusted by the operating pressure or the amount of air. The motor is available in three versions: F 416 Ex with tip valve, F 416-1 Ex without valve and F 416-2 Ex with ball valve.
-
