Showing 1–9 of 22 results
-
Ebara – 2CDX
210 l/m
0.8 Mpa
-5°C to 110°C
Ebara centrifugal pump – GSO series with comply with international standards: – Outline dimension : ISO2858 and EN22858; – Pump design : ISO5199; – Seal chamber dimensions : ISO3069
Brand: Ebara
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd
-
Ebara – GSO
- 1400 m³/h
- 16 bar
- -30°C to 150°C
Ebara centrifugal pump – GSO series with comply with international standards: – Outline dimension : ISO2858 and EN22858; – Pump design : ISO5199; – Seal chamber dimensions : ISO3069
Brand: Ebara
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd
-
Ebara – CDX
- 15 m³/h
- 8 bar
- -5°C to 110°C
Single-impeller centrifugal pump in AISI 304 and AISI 316 stainless steel, with radial impeller and components made by the hydroforming process that provides high resistance to corrosion. The versatility of these electric pumps is due to the different types of mechanical seals that can be applied.
Brand: Ebara
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd
-
Ebara – EVM, EVMS
- 90 m³/h
- 25 bar
- -30°C to 140°C
Vertical multistage centrifugal pump available in AISI 304 (EVMS), in AISI 316L (EVMSL) and in cast iron (EVMSG).
Brand: Ebara
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd
-
Ebara – GS
- 1300 m³/h
- 25 bar
- -25°C to 140°C
Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution. The wide range (from DN 32 up to DN 200-500), the variety of materials available, the easy maintenance and the hydraulic efficiency, are further enhanced by the interaction with the electronic solutions also offered by EBARA.
Brand: Ebara
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd
-
Ebara – 3
- 240 m³/h
- 10 Bar
- 110 °C
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
Brand: Ebara
Origin: Japan
The product is officially distributed in Vietnam by Tan Long Technology Solutions Co., Ltd
-
Travaini – TCH
- 500 m³/h
- 16 bar
Monostage centrifugal pumps with closed impeller according to ISO 2858 and 5199.
Handling clean or slightly contaminated liquids, hot, superheated, acidic and caustic in chemical industry, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile, etc.
-
Travaini – MCU-CH
- 1200 m³/h
- 6 bar
The monostage centrifugal pumps are principally for chemical and petrochemical applications and used on almost all the plants. The new design and the wide sizing of the bearing housings allows high reliability and minimum maintenance while the special design of hydraulic profiles for the impeller and the casing allows to reach high efficiencies and low NPSH in any application. The pumps are standardized according to ISO 2858/DIN 24256 standards and the manufacturing program includes three bearing frame sizes of the “Back pull-out” type; the pump casing is of the spiral type with axial suction flange; the impeller is of the radial type with overhang mounting.
-
Travaini – TCH GR.5
- 500 m³/h
- 16 bar
The new pumps series TCH and derived series of the same family, reflect the design guidelines given by ISO 5199 class II standards: these norms provide for the introduction of new and severe manufacturing standards applicable to the pumps manufactured according to ISO 2858/DIN 24256 standards in order to get an ideal product for the heaviest uses, especially in the petrochemical industry, following the example of API standards.
