Showing all 7 results
-
CSC 40-60/ CSD 75-100/ DRC 40-60/ DRD 75-100/ DRE 100-150
100 HP
11517 l/min
13 bar
Ceccato CSC/CSD and DRC/DRD/DRE ranges offer a wide choice of compressors from 30 till 110 kW, belt or gearbox driven, with fi xed speed (load-unload) control or variable speed (IVR) control. Energy costs and your specifi c requirements will help you choose the most suitable compressor for your application. Whatever model you choose, high standard components guarantee performance and design synergy ensures the easy operation you are looking for.
-
DRC 40-60/ DRD 75-100/ DRE 100-150 HP
- 150 HP
- 20017 l/min
- 13 bar
The Ceccato DRC-DRD-DRE range consists of highly qualified gear driven oil-injected screw compressors. They are compact, solid, easy to install and need very low maintenance. The range is now available from 40 to 150 hp, with or without dryer, with fixed speed control. Whatever model you choose it will provide your workplace with high class compressed air equipment.
-
CSA 5,5-20 HP / CSB 15-40 HP
- 40 HP
- 3.993 l/min
- 13 bar
The Ceccato CSB range offers a wide choice of compressors from 15 to 40 hp, with fixed speed control or variable speed (IVR) control, basemounted or installed on an air vessel with dryer up to 30 hp. Following your needs , the CSB will allow you to choose the right solution for your compressed air demand in order to save costs on energy consumption and installation. Whatever model you choose, high standard components guarantee a solid performance while the optimised design ensures high reliability.
-
SCREW AIR COMPRESSOR + TANK
- 20 HP
- 2000 lpm
- 13 bar
High performance, silent running, simple installation and maintenance, makes the CSA compressor belong to the top class models currently available in the market.
The use of highly reliable components and the high productive efficiency of our renewed assembly lines, result in an even more reliable product. A rationalised layout, a lower number of components subject to wear and their ergonomic positioning reduce operating costs. -
OIL-FREE COMPRESSED AIR PRODUCTION
- 2 HP
- 480 l/min
- 8 bar
The CleanAIR oil-free compressors produce air at the highest quality, suitable for dentists, laboratories, surgeries, food packaging, drink dispensing and
many other applications where hygienic and clean air is a must.
The option of a top of the line adsorption dryer assures dry air down to -40 °C dew point.
Optional acoustic canopy can be selected to guarantee extremely low noise levels.
All vessels are treated internally with epoxy coating to avoid corrosion, extend lifetimes and assure a safe operation. -
REFRIGERANT DRYERS
- 12.300 W
- 5.040 m³/h
- 16 bar
A compressor takes humidity and contamination from the intake air, during the compression process these particles combine with the oil used in the compressor.
All these impurities can cause wear and corrosion to the downstream equipment, with potential costly interruption to production, and reduction in the efficiency and service life of the equipment used.
To reduce this negative impact, a range of refrigerant dryers has been developed to ensure air quality, increase efficiency and productivity and lengthen the life span of your equipment and tools. -
ADS 1-215 DESICCANT DRYERS
- --
- 1548 m³/h
- 16 bar
The Ceccato ADS adsorption dryers will eliminate water vapour that may potentially condensate in your compressed air system and cause damage. These dryers use an adsorption material called “desiccant” in order to absorb and remove (by regeneration phase) the humidity from the compressed air. With this method we can reach a PDP < 3°C ( -40°C. or -70°C.). This range should also be used when the ambient temperature goes below freezing point, to avoid ice building in pipes and applications. The ADS range is typically used in the chemical, food and pharmaceutical industry and whenever a PDP <3°C is requested.
Adsorption removes the remaining moisture content in the air that will condense out even downstream of a refrigerant dryer. Its technology ‘simulates’ a temperature reduction down to -40°C to -70°C by attracting and retaining moisture with the desiccant media (moisture freezes at +3°C actual temperature reduction) to condense out the very last water content in the air. The moisture is removed from the air fl ow to your network and released. Adsorption dryers are recommended for the most demanding applications, where no moisture contamination can be accepted.
