Description

The Flux FMO flow meter constructed on the oval rotor principle is designed for the stationary use in pipe lines and mobile use with FLUX drum pumps and eccentric worm-drive pumps.

Benefits for  Flux FMO

• Very precise dosing possible
• High resistancy
• Wide range of viscosities can be covered
• Can also be used for pulsating volume flows
• Low pressure loss
• Also available in Version with FDA CFR 21

Flux FMO 101 – FMO 102

The FMO oval rotor flow meter is suitable for use with thin to highly viscous, clean liquids. With the FLUXTRONIC^®, batching and dosing a wide variety of liquids can be performed with a high degree of accuracy and safety. In automatic mode it is possible to batch and meter.  For example, when paired with the FAE hand nozzle and FSV amplifier, one-touch batching with automatic shutoff is possible.

• Flow Rate: 0.02 – 0.44 GPM (0.09 – 1.67 l/min) (FMO 101); 0.11 – 2 GPM (0.44 – 8.3 l/min) (FMO 102)
• Measurement error of the flow rate at < 5 cPs: +/- 2.5%
• Measurement error of the flow rate at > 5 cPs: +/- 1%
• Operating pressure max: PVDF: 145 PSI S: 1450 PSI
• Viscosity max: 1000 cPs
• Housing Materials: Polyvinylidene flouride, Stainless steel
• Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels

Flux FMO 104 – FMO 110

The flow meter FMO 104 built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC^® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier.  This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

• Flow rate: min. 1 l/min – max. 30 l/min
• Filling accuracy: +/- 0,5 %
• Operating pressure: max. 200 bar
• Viscosity: max. 500.000 mPas
• Housing Materials: Aluminium, Stainless steel
• Media / Fluids: Fuels, Alkalis, Highly flammable media, Solvents, Petroleum products, Acids

Flux FMO 140 / FMO 150

The flow meter FMO 150 built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC^® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier.  This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

• Flow rate: min. 15 l/min – max. 380 l/min
• Filling accuracy: +/- 0,5 %
• Operating pressure: max. 16 bar¹
• Viscosity: max. 500.000 mPas²
• Housing Materials: Aluminium, Stainless steel
• Media / Fluids: Fuels, Alkalis, Highly flammable media, Solvents, Petroleum products, Acids

=============