Viking – 34

Viking 34 Series™ Asphalt Pumps are designed to handle asphalts, bitumens, pitch, tar, bunker oils, residual oils and related materials that solidify at ambient temperatures. The 34 Series™ pumps are Viking’s simplest asphalt pumps, with a hydraulically-balanced rotor that eliminates the need for thrust control, but also limits the pressures to 100 PSI and less.

These asphalt pumps melt ambient-temperature solids to a liquid state prior to pump startup using integral jacketing for steam or hot oil. The 34 Series™ are available as packed pumps only

Danh mục: Máy bơm công nghiệp, Bơm bánh răng Viking (Mỹ), Dòng sản phẩm cho môi chất đặc biệt Từ khóa: Viking - USA, Bơm bánh răng Viking - Mỹ, Gear Viking Pump - USA, Liquid Specific Product Line, Dòng sản phẩm cho môi chất đặc biệt, Viking 34 series

Tải tài liệu

Gửi báo giá

Mô tả

Mô tả

FEATURES & BENEFITS

Standard Jacketed Rotor Bearing Sleeve
Jacket chamber indicated above accommodates the heating or cooling agent. All chambers are suitable for maximum steam pressures of 150 PSI or 365°F.
Standard Jacketed Head*
34 Series™ pumps are equipped with this type of head as standard. Pumps with jacketed heads cannot be furnished with relief valve on head. Some form of pressure relief is recommended in the discharge line.
Standard Jacketed Casing
Complete jacketed casing section shown above. All pumps are available with right-hand ports as standard. Left-hand on special order only. All jacketed features are furnished as standard on 34 Series™ pumps.
Optional Jacketed Valve
Jacketed valve on non-jacketed head can be furnished on all pump sizes. Note the complete jacketing of the valve. Eliminates liquid solidifying in the valve. Maximum steam pressure 150# or 365

===========

CAPACITY: .0 to 450 GPM (0 to 102 m³/h)

PRESSURE: to 100 PSI (to 7 Bar)

TEMPERATURE: -60 to +450 °F (-50 to +230 °C)

VISCOSITY: 31 to 250,000 SSU (1 to 55,000 cST)

✦ ✦ ✦ ✦ ✦ ✦ ✦ ✦